User manual BOSE CINEMATE GS SERIES II

[. . . ] CINEMATE SERIES II CINEMATE GS SERIES II ® ® DIGITAL HOME THEATER SPEAKER SYSTEM Owner's Guide Guía de usuario Notice d'utilisation Guia dos proprietários Svenska Nederlands Français Italiano Español Deutsch English SAFETY INFORMATION Please read this guide Please take the time to follow the instructions in this guide carefully. It will help you set up and operate your system properly and enjoy all of its advanced features. The interface module is to be used only with the Acoustimass® module in the CineMate® system. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. [. . . ] When the system is muted, the green LED flashes until audio is restored. Note: The CineMate series II remote control only operates your CineMate series II system. 16 English Deutsch Español Français Italiano Nederlands Svenska CONTROLS AND INDICATORS CineMate® GS series II remote control The remote control provided with the CineMate GS series II system can be programmed to control your TV, DVD or Blu-ray disc player, cable/satellite box, VCR, and Digital Video Recorder (DVR). With the CineMate GS series II system universal remote, you can enjoy the convenience of using only one remote control for all your home theater equipment. Once your universal remote control has been set up correctly, you can use it to control your TV, DVD player, and other audio/video sources. CineMate GS series II remote control 17 Svenska CONTROLS AND INDICATORS Nederlands Français Italiano Deutsch Español English Using the remote to control the CineMate® system When you point the remote control at the interface module and press the On-Off, Volume, or Mute button, the green LED on the interface module flashes. When maximum volume is reached, the green LED on the interface module flashes twice. When the minimum volume is reached, the green LED on the interface module flashes twice. When the system is muted, the green LED on the interface module flashes until audio is restored. The universal remote can also be programmed to control up to five audio/video devices and will control the functions of one device at a time. Setting the remote for your TV and other devices To use the remote with your TV, you must set the remote for the proper TV device code. Locate the device code(s) for your brand of TV and start with the first one. Press and hold Setup on the remote until all five source buttons light up. On the remote keypad, enter the first device code for your brand of TV. Check that the TV source button blinks twice and turns off after the code is entered. Note: During programming, the five source buttons will flash rapidly three times if you press an invalid key or enter an unavailable device code. If this happens, go back to Step 1 and start over. 18 English Deutsch Español Français Italiano Nederlands Svenska CONTROLS AND INDICATORS Follow the same procedure for each of your other devices, using the appropriate device code and source button for each one. Using the remote to watch TV Note: In order to control your TV and other audio/video devices using the remote control, you must first program the remote with a device code for each device. Press TV On-Off to turn on your TV and the CineMate® speaker system. The button will flash to indicate that the remote control is in TV mode. TV source button To control a combination device · If you are programming the remote to control a combination device that has more than one source, such as a VCR/DVD unit, you can program the combination code into either remote control source. You may find it convenient to program the code twice ­ once for the VCR and once for the DVD. · To find the right device code, first search the "COMBINATION" listings in the universal remote device codes book. If you cannot find a valid code there, then search the listings for individual device types (TV, CBL, VCR, DVD, etc. ). 3. See "Using the CineMate® GS series II remote control" on page 21 for a complete description of the remote's buttons. In addition to controlling TV functions, the remote will control the basic CineMate speaker functions, such as turning on the speaker system, changing the volume, and muting or turning off the speaker system. 19 Svenska CONTROLS AND INDICATORS Nederlands Français Italiano Deutsch Español English Using the remote to watch a DVD Note: In order to control your TV and other audio/video devices using the remote control, you must first program the remote with a device code for each device. Press TV On-Off to turn on your TV and the CineMate® speaker system. [. . . ] · If using a sound source other than the TV, check to ensure that the device is playing source material. No sound 27 Svenska CARE AND MAINTENANCE Nederlands Français Italiano Deutsch Español English Problem Sound but no picture Remote control is inconsistent or does not work What to do · Make sure the TV is turned on. · · · · · · Check the battery to be sure it is installed properly. Relocate the interface module, making sure it is in a clear line of sight to the remote and there are no obstructions. Make sure the protective film is removed from the lens on the front of the interface module. [. . . ]