User manual BOSE BOSE SOUNDDOCK ORIGINAL

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, alerts the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle alerts the user to the presence of important operating and maintenance instructions in this owner’s guide. CAUTION: Do not place any naked flame sources, such as lighted candles, on or near the apparatus. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats. [. . . ] To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. Do not let objects or liquids enter the product – as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Use proper power sources – Plug the product into a proper power source, as described in the operating instructions or as marked on the product. Information about products that generate electrical noise If applicable, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the antenna in the device receiving the interference. € Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected. This product complies with the Canadian RSS-310 Class B specification. Iii TAB 8 TAB 7 TAB 6 TAB 5 TAB 4 TAB 3 TAB 2 English Your new SoundDock® Series II Congratulations on your choice of the SoundDock® Series II digital music system from Bose. Designed specifically to work with your iPod, this system provides high-quality audio performance that invites your music to come out and play. Don’t be surprised if it attracts a wide audience of people who love the sound. With the SoundDock Series II digital music system, you get: • Full compatibility with most iPod models. € Remote control of your iPod navigation functions while it is docked in the system. SoundDock Series II digital music system Remote control Power pack Power cord 2 English TAB 2 TAB 3 TAB 4 TAB 5 TAB 6 TAB 7 TAB 8 Placement and power connections Place the SoundDock® Series II digital music system on a firm and level surface. The system will not cause interference if it is placed near a computer or video screen. Playing your iPod Your SoundDock system is ready to go as soon as you plug it in. To adjust the SoundDock system volume, press Volume Up (+) or Down (-), located on the dock. When the volume reaches maximum or mimimum, a green light under the front grille flashes several times. Insert the small end of the power cord into the connector on the power pack. The navigation controls on your iPod are fully functional while it is docked in the system. [. . . ] Using an Apple insert The SoundDock® Series II digital music system features a removable universal insert. To remove the universal insert, put your fingernail (as shown) in the slot (or gently use a thin object) and pull up. Remove the used battery and replace with a new battery (CR2032 or DL2032). € Do not allow liquids to spill or objects to drop into any openings. [. . . ]