User manual BOSE 321 GS II

[. . . ] Owner's Guide Safety Information WARNING: To reduce the risk of fire or electric shock, do not expose the system to rain or moisture. WARNING: This apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on the apparatus. As with any electronic products, use care not to spill liquids in any part of the system. Liquids can cause a failure and/or a fire hazard. CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Note: More than one code may work with your particular brand of product. If you notice a lack of response or limited functionality after setting up the remote, try a different code. Note: The remote status LED flashes rapidly eight times if you press an invalid key, or enter an unavailable device code. Wait seven seconds for the error to clear and start again. Direct entry of a device code Device codes can be found at the back of this owner's guide or in the System menu under Remote Control options. If you know the device code, you can do the following: To set up the remote to control your TV 1. Press and hold the TV button until the remote LED is lit (about five seconds). If you are still unsuccessful, see "Searching for a device code" on page 36. Turn on both the 3·2·1 system and your cable/satellite box. Press and hold the CBL-SAT button until the remote LED is lit (about five seconds). On the remote keypad, enter the four-digit device code for your cable/satellite box. Point the remote at your cable/satellite box and press the CBL-SAT On-Off button. If your cable/satellite box does not respond, go back to step 2 and try other codes. If you are still unsuccessful, see "Searching for a device code" on page 36. 35 Controlling Other Audio Devices To set up the remote to control your VCR or PVR (such as Tivo or Replay TV) 1. Turn on both the 3·2·1 system and your VCR or PVR. AUX 2. Press and hold the AUX button until the remote LED is lit (about five seconds). On the remote keypad, enter the four-digit device code for your VCR/PVR. If your VCR or PVR does not respond, go back to step 2 and try other codes. If you are still unsuccessful, see "Searching for a device code" on page 36. Searching for a device code Use this method if you do not know the device code for a device. Alternately press Channel and TV On-Off until your TV turns off. 4. If your TV does not respond, go back to step 2 and try again. 36 Controlling Other Audio Devices To set up the remote to control your cable/satellite box 1. Turn on both the 3·2·1 system and your cable/satellite box. Press and hold CBL-SAT until the remote LED is lit (about five seconds). [. . . ] 0037, 0000, 0072, 0278, 0062, 0637, 0020 Gradiente. . . . . . . . . . . . . . . . . . . . . 0081, 0072, 0195, 0347, 0293, 0226, 0034 Hanseatic . . . . . . . . . . . . . . . . . . . . 0037, 0240, 0000, 0042, 0041, 0004, 0166 Hughes Network Systems. . . . . . . . . . . . . . . . . . . . . . . 0037, 0045, 0042, 0209, 0038, 0040 Lloyd's . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]