User manual BOSCH TWK3A011

[. . . ] You have acquired a high-quality product that will bring you a lot of enjoyment. Please read the operating instructions carefully and keep them for future reference. [. . . ] After boiling, let the kettle cool down for 5 minutes before refilling it with water. Do not turn on the appliance if the kettle 1 is empty, otherwise the overheat control will engage and the appliance will switch itself off automatically. — Unroll the right amount of cable from the cable tidy 6 and plug it in. — When the water comes to a boil for the first time, add a tablespoon of white vinegar. Before using for the first time Boiling water ● Remove the lid 2 and fill the kettle 1 with fresh water through the opening or spout. The appliance can also be switched off at any time by pulling up the O / I ON/OFF switch 3. Warning: If you remove the kettle 1 from the base and replace it before the heating process is over, the kettle will not continue to heat the water. — Remove the limescale filter 4, soak it in a little vinegar, then rinse clean with clear water. Cleaning and maintenance Robert Bosch Hausgeräte GmbH en 7 Descaling Regular descaling – makes your kettle last longer; – ensures proper function; – saves energy. — Fill the kettle 1 with water up to the 1, 7 mark and bring to a boil. Next, add a small amount of white vinegar and let it sit for several hours. You can also use a commercial descaling product and follow the manufacturer’s instructions. [. . . ] Condiţii de garanţie Pentru acest aparat sunt valabile condiţiile de garanţie care au fost publicate de către reprezentanţa competentă a ţării din care a fost cumpărat aparatul. Grand Union House Old Wolverton Road Wolverton Milton Keynes MK12 5PT To arrange an engineer visit, to order spare parts and accessories or for product advice please visit www. [. . . ]