User manual BOSCH PWS 13-125

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. unmodified plugs and matching outlets will reduce risk of electric shock. [. . . ] The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep hands warm, organise work patterns. Declaration of Conformity We declare under our sole responsibility that the product described under “Technical Data” is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2011/65/EU, 2004/108/EC, 2006/42/EC. Book Page 20 Wednesday, October 19, 2011 4:00 PM 20 | English Assembly Mounting the Protective Devices Before any work on the machine itself, pull the mains plug. Note: After breakage of the grinding disc during operation or damage to the holding fixtures on the protection guard/power tool, the machine must promptly be sent to an after-sales service agent for maintenance for addresses, see section “After-sales Service and Customer Assistance”. Protection Guard for Grinding Place the protection guard 7 onto the spindle collar as shown in the illustration. The triangle marks on the protection guard must correspond with the respective marks on the gear case. Press the protection guard 7 onto the spindle collar until the shoulder of the protection guard is seated against the flange of the machine, and turn the protection guard until it can clearly be heard to engage. Adjust the position of the protection guard 7 to the requirements of the work process. For this, press the release lever 1 upward and turn the protection guard 7 to the required position. Adjust the protection guard 7 in such a manner that sparking is prevented in the direction of the operator. The protection guard 7 may be turned only upon actuation of the release lever 1!Otherwise the power tool may not continue to be used under any circumstances and must be taken to an after-sales service agent. Note: The encoding keys on the protection guard 7 ensure that only a protection guard that fits the machine type can be mounted. Protection Guard for Cutting For cutting with bonded abrasives, always use the protection guard for cutting 12. The protection guard for cutting 12 is mounted in the same manner as the protection guard for grinding 7. Cutting Guide with Dust Extraction Protection Guard The cutting guide with dust extraction protection guard 19 is mounted in the same manner as the protection guard for grinding 7. Auxiliary Handle Operate your machine only with the auxiliary handle 5. [. . . ] Undgå at bære el-værktøjet med fingeren på afbryderen og sørg for, at el-værktøjet ikke er tændt, når det sluttes til nettet, da dette øger risikoen for personskader. Slibeskiver for afsplintninger og revner, slibebagskiver for revner, slid eller stærkt slid, trådbørster for løse eller brækkede tråde. Anvend altid ekstrahåndtaget, hvis et sådant findes, for at have så meget kontrol som muligt over tilbageslagskræfterne eller reaktionsmomenterne, når maskinen kører op i hastighed. Understøt plader eller store emner for at reducere risikoen for et tilbageslag som følge af en fastklemt skæreskive. [. . . ]