User manual BOSCH PST8500PEL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSCH PST8500PEL. We hope that this BOSCH PST8500PEL user guide will be useful to you.


BOSCH PST8500PEL : Download the complete user guide (8295 Ko)

Manual abstract: user guide BOSCH PST8500PEL

Detailed instructions for use are in the User's Guide.

[. . . ] Com  Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Never use the cord for carrying, pulling or unplugging the power tool. ς When operating a power tool outdoors, use an extension cord suitable for outdoor use. [. . . ] 14) Declaration of Conformity We declare under our sole responsibility that the product described under “Technical Data” is in conformity with all relevant provisions of the directives 2011/65/EU, 2014/30/EU, 2006/42/EC including their amendments and complies with the following standards: EN 60745-1, EN 60745-2-11. 2014 Assembly  Before any work on the machine itself, pull the mains plug. Replacing/Inserting the Saw Blade  When mounting the saw blade, wear protective gloves. Book Page 15 Friday, September 26, 2014 12:15 PM English | 15 Selecting a Saw Blade An overview of recommended saw blades can be found at the end of these instructions. Use only T-shank saw blades or saw blades with 1/4" universal shank (U-shank). The saw blade should not be longer than required for the intended cut. Inserting the Saw Blade (see figure A1)  Clean the shank of the saw blade before inserting it. Insert the saw blade 15 (teeth in cutting direction) to the stop into the saw blade holder. While inserting the saw blade, pay attention that the back of the saw blade is positioned in the groove of the guide roller 14. Removing the Saw Blade (see figure A2) Push the saw blade holder 13 upward in the direction of the arrow and remove the saw blade 15. If the saw blade is wedged or jammed when removing, set adjusting lever 7 to maximum orbital action and press the saw blade holder 13 lightly toward the front (max. Saw Blade Storage (see figure B) (PST 800 PEL/PST 8000 PEL/PST 8500 PEL) Up to six saw blades with lengths to 110 mm can be stored in the saw blade storage 5. Insert the saw blades with the T-shank into the recess of the saw blade storage intended for this. Shut the saw blade storage and slide it to the stop into the opening of the base plate 6. Dust/Chip Extraction  Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health. €Cut Control” (PST 800 PEL/PST 8000 PEL/PST 8500 PEL) “Cut Control” enables precise guiding of the power tool along a cutting line marked on the workpiece. The “Cut Control” kit includes the viewing window 11 with cutting marks and the base 10 for attachment to the power tool. Attaching “Cut Control” to the Base Plate (see figure D) Clamp the “Cut Control viewing window ” 11 into the holders of Cut Control base 10. Then, lightly press the base together and allow it to engage into the accessory holder 17 of the base plate. Operation Operating Modes  Before any work on the machine itself, pull the mains plug. Orbital Action Settings The four orbital action settings allow for optimal adaptation of cutting speed, cutting capacity and cutting pattern to the material being sawed. Book Page 16 Friday, September 26, 2014 12:15 PM 16 | English The orbital action can be adjusted with the adjusting lever 7, even during operation. [. . . ] Uk you can order spare parts or arrange the collection of a product in need of servicing or repair. Za Maintenance and Service Maintenance and Cleaning  Before any work on the machine itself, pull the mains plug. ς For safe and proper working, always keep the machine and ventilation slots clean. For this, remove the saw blade from the machine and lightly tap out the machine on a level surface. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH PST8500PEL




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH PST8500PEL will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.