User manual BOSCH PSA 900E

[. . . ] Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. [. . . ] Noise/Vibration Information Measured sound values determined according to EN 60745. Typically the A-weighted noise levels of the product are: Sound pressure level 90 dB(A); Sound power level 101 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep hands warm, organise work patterns. product Description and Specifications Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Intended Use The machine is intended for sawing wood, plastic, metal and building materials while resting firmly on the workpiece. When using the appropriate bimetal saw blades, it is possible to cut flush to the workpiece surface. Product Features The numbering of the product features refers to the illustration of the machine on the graphics page. 1 Saw blade* 2 Base plate 3 Saw blade holder 4 Stroke rod 5 SDS clamping lever for saw blade release 6 On/Off switch 7 Handle (insulated gripping surface) 8 Clamping plate *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. Bosch Power Tools Declaration of Conformity We declare under our sole responsibility that the product described under “Technical Data” is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2011/65/EU, 2004/108/EC, 2006/42/EC. Egbert Schneider Senior Vice President Engineering Helmut Heinzelmann Head of Product Certification PT/ETM9 Operation Operating Modes Before any work on the machine itself, pull the mains plug. 2012 Pivoting Footplate (see figure B) Due to its movability, the adjustable footplate 2 adapts to the required angular position of the surface. Assembly Replacing/Inserting the Saw Blade Before any work on the machine itself, pull the mains plug. When changing the saw blade, take care that the saw blade holder is free of material residue, e. Selecting a Saw Blade An overview of recommended saw blades can be found at the end of these instructions. [. . . ] Nedan använt begrepp ”Elverktyg” hänför sig till nätdrivna elverktyg (med nätsladd) och till batteridrivna elverktyg (sladdlösa). Når du bruker en skjøteledning som er egnet for utendørs bruk, reduseres risikoen for elektriske støt. Bruk av personlig sikkerhetsutstyr som støvmaske, sklifaste arbeidssko, hjelm eller hørselvern – avhengig av type og bruk av elektroverktøyet – reduserer risikoen for skader. Book Page 48 Monday, April 16, 2012 7:33 AM 48 | Norsk Illustrerte komponenter Nummereringen av de illustrerte komponentene gjelder for bildet av elektroverktøyet på illustrasjonssiden. [. . . ]