User manual BONTEMPI AZ 1250

[. . . ] RANDOM/ MEM DOWN FM MODE MONO/STEREO Selects the previous preset position. Switches between mono and stereo reception (right side of device). CD unit (AZ 1250) OPEN/CLOSE PLAY/PAUSE UP 9 DOWN 8 STOP/BAND PROG/ MEM RANDOM/ MEM DOWN II Opens and closes the CD compartment. For saving tracks when creating a memory. REPEAT/MEM UP For repeating a track or the entire CD. Plays back tracks in random order. 18 OVERVIEW ______________________________________________________ CD unit (RCD 1420) OPEN/CLOSE PLAY/PAUSE UP 9 DOWN 8 STOP/BAND PROG/ MEM ALBUM MEMORY UP II Opens and closes the CD compartment. [. . . ] Protect the device, the CDs and cassettes from rain, moisture (dripping or splashing water), sand and heat. Do not place any objects containing liquids (for example, vases) on the device. Do not insert any foreign bodies in the CD or tape compartment of the device. Bringing the device in from the cold can cause condensation on the CD lens, which prevents it from playing. The CD and tape units contain self-lubricating bearings, which must not be oiled or greased. No warranty claims are accepted for damage resulting from improper handling. Even if the device is switched off, it can be damaged by a lightning strike to the mains. Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic, most of which contain chemical additives. These may cause corrosion to the feet of the device, thus resulting in stains on the surface of the furniture which can be difficult or impossible to remove. General information on laser devices You will find a symbol similar to the one shown here on the bottom of the device. CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT means that the laser is designed in such a way as to ensure that the maximum permissible emission value cannot be exceeded under any circumstances. If operating devices or methods other than those specified here are employed, it may lead to dangerous exposure to emissions. Invisible laser radiation is emitted if the CD compartment is opened and the safety locking mechanism is shorted. Do not expose yourself to this radiation. 23 ENGLISH GENERAL FUNCTIONS __________________________________ Switching on and off 1 2 Switch on the device with the required input source by moving the switch to the »CD OFF RADIO« position. To terminate the function, press »REPEAT/MEM UP« (AZ 1250) or »MODE« (RCD 1420). 2 Repeating all tracks (Repeat All) 1 During playback press »REPEAT/MEM UP« (AZ 1250) or »MODE« (RCD 1420) twice. To terminate the function, press »REPEAT/MEM UP« (AZ 1250) or »MODE« (RCD 1420) once. 2 Playing back titles in random order (Random) 1 2 3 In stop mode, keep pressing »RANDOM/MEM DOWN« (AZ 1250) or »MODE« (RCD 1420) until »RANDOM« or »RND« appears in the display. To terminate the function, press »RANDOM/MEM DOWN« (AZ 1250) or »MODE« (RCD 1420) again. 27 ENGLISH CD MODE (AZ 1250/1420) ______________________ Creating a track memory You can create a track memory of up to 20 tracks for the current CD in any order you choose and then play them back in that sequence. Program is only possible in the stop position. Selecting and storing tracks 1 2 3 4 Press »PROG/MEM« to call up the function. ­ Display: »P 01« for the first preset position, »MEMORY« flashes. Select the track by pressing »DOWN 8« or »UP 9«. ­ Display: »P 02« for the second preset position, »MEMORY« flashes. To store more tracks, repeat steps 2 to 3. Playing back a track memory 1 2 3 Start the track memory by pressing »PLAY/PAUSE II«. Press »STOP 7 « to end playback. To play the track memory again, press »PROG/MEM« and afterwards »PLAY/PAUSE II«. Changing the track selection 1 2 3 In stop mode, keep pressing »PROG/MEM« until the number of the track you want to replace appears in the display. Select the number of the new track by pressing »DOWN 8« or »UP 9«. Press »PROG/MEM« to save the new track. Adding tracks 1 2 3 In stop mode, press »PROG/MEM« until the preset number shown in the display is zero. [. . . ] However, you must then start playback of the file with »PLAY/PAUSE II«. However, you can only select an album if it actually contains MP3 files. Repeating a file (Repeat 1) 1 2 During playback, press »MODE« once. To quit the function, press »MODE« until the repeat indicator goes out. Repeating all the files in an album (Repeat Album) 1 2 During playback, press »MODE« twice. To quit the function, press »MODE« until the repeat indicator goes out. Repeating all files (Repeat All) 1 2 During playback, press »MODE« until »M ALL« appears in the display. [. . . ]