User manual BLITZ BZTV7R

[. . . ] When the temperature of the unit falls such as during winter, the monitor screen will become darker than usual. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. Any changes or modifications to this product not approved by the supplier could void the warranty and will violate FCC approval. 2 Handling Discs Playable Discs This product only requires using of 12cm following circular discs. DVD-R, DVD-RW, CD-R and CD-RW can be played back, but it depends on the recorded condition. Region number(Regional restriction number) 1 - USA, CANADA 2 - EUROPE, JAPAN, SOUTH AFRICA, MID EAST ASIA 3 - KOREA, SOUTH ASIA 4 - LATIN AMERICA, SOUTH AMERICA, AUSTRALIA, NEW ZELAND 5 - RUSSIA, INDIA, MONGOLIA, AFRICA 6 - CHINA 7 - ALL COUNTRY The Region number of this unit is set at your region number. DVD players and DVD video discs each have an assigned region number, and if this numbers do not match, a disc cannot be played. Handling Discs *Do not forcibly insert or remove discs. [. . . ] Select [NONE] when no DVD or CD changer is connected to the AV control box. *The factory default setting is [NONE]. *The car DVD or CD changer is an optional item. *Only when 6 disc CD changer, 10 or 12 disc DVD changers which we are supplying is connected, all the functions are working as mentioned in here. *To control of the 10 or 12 DVD changer, see the owner's manual of the DVD changer. Operating the10/12 DVD Changer or the 6 CD Changer Touch [MODE] key and then touch [CDC] key to select CD/DVD changer mode. Touch [ Track/Chapter Search ] or [ I] to search the track/chapter number of the current disc. [ALL] or [OFF] [ALL] : All the track on the current disc plays repeatedly [ONE] :The selected track on the current disc plays repeatedly. [ALL] or [OFF] [ALL] : The first 10 seconds of each track of all discs plays in succession. [ONE] :The first 10 seconds of each track of the current disc plays in succession. [ALL] or [OFF] [ALL] : All the tracks of all discs plays in random order. [OFF] : Randpm play will be off. 14 Navigation Operation with Touch Keys Setting Up 1. Each time [NAVI] is touched, Input source is switches as follows. <Version 1> NONE -> NOVA -> DW -> NONE [NONE]:Select no navigation unit is connected to the unit. *The factory default setting is [OFF]. MAIN PAGE Select [MAIN PAGE] to return to "SETUP MENU -- MAIN PAGE" menu. 17 DOWNMIX [LT/RT]: Select for Pro Logic left and right audio output. * The factory default setting is [STEREO] . Select a desired output mode for audio signals. [SPDIF/RAW]: Outputs 5. 1 ch digital signals through optical connection to a digital amplifier. [SPDIF/PCM]: Outputs 2 ch digital signals through optical connection to a digital amplifier. * Select [SPDIF/RAW] or [SPDIF/PCM] when a digital amplifier is connected to the AV control box. AUDIO OUT Select audio output level. * The factory default setting is [RF REMOD] . OP MODE Select a desired audio output mode. [STEREO]: Stereo audio output [L-MONO]: Left audio output only [R-MONO]: Right audio output only. [MIX-MONO]: Left and right both audio output * The factory default setting is [STEREO] . DUAL MONO Set up Dolby Pro Logic [OFF]: Dolby Pro Logic Off. * The factory default setting is [ON] . PRO LOGIC Select according to PCM output frequency of your digital amplifier. [LPCM 48K] [LPCM 96K] * The factory default setting is [LPCM 96K] . LPCM OUTPUT 18 Preferences AUDIO Select a desired audio language. KOREAN, ENGLISH, FRENCH, SPANISH, CHINESE, JAPANESE *The factory default setting is [ENGLISH]. [. . . ] Before calling service, first check the following table for possible problems. Problem Possible Cause Solution After checking for short circuits in the wires, replace the fuse with one having the same rating. For safety reasons, the monitor does not open while the vehicle is moving. Make proper connections according to "wire connection" For safety reasons no television/video images are displayed while the vehicle is moving. If the temperature of the monitor drops, the screen may appear darker when power is first turned on due to the characteristics of a liquid crystal panel. [. . . ]