User manual BLAUPUNKT WOODSTOCK DAB 53

[. . . ] DAB-Radio / CD / MP3 / MMC/SD Woodstock DAB 53 Operating instructions http://www. blaupunkt. com Open here 2 1 2 3 4 16 15 5 6 14 7 8 9 13 12 11 10 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 6 7 8 Button, to unlock the removable control panel (release panel) Volume control Button, to switch the unit on/off and operate the volume mute feature DAB·TS button Short press: to select DAB mode (Digital Audio Broadcast). BND·TS button Short press: to select radio mode, the FM memory banks, and the MW and LW wavebands. DIS, to change the display contents MENU button, to open the main settings menu. 9 : ; < = > ? @ button, to open the flip-release control panel Arrow buttons OK button, to confirm menu entries and start the scan function, For starting and stopping recording onto MMC/SD DEQ button, to activate/deactivate and adjust the equalizer AUDIO button (audio), to adjust the bass, treble, balance and fader Keys 1 - 5 and TRAF, for switching traffic information standby on/off RDS·SF button. SRC button, to switch the source between CD, CD changer (if connected), AUX (if activated), MMC/SD and MicrodriveTM Player (if connected). 47 CONTENTS Notes and accessories . . . . . . . . . . [. . . ] Note: You can stop a traffic announcement whilst it is being played by pressing the TRAF button >. The general priority settings are retained and the next traffic announcement will be played. Since some programmes do not yet support TA via DAB, you might hear the warning sound if you switch from FM to DAB whilst the TA function is activated. Note: You can adjust the sound and volume distribution settings for traffic announcements. For further details, refer to the chapter entitled "Sound and volume distribution settings. " DAB-FM traffic information source The device always switches automatically to an incoming traffic announcement that is being broadcast via DAB (in DAB mode) or FM (in radio mode). In AUX, Compact Drive MP3, MMC/SD, CD and CD-changer mode, you will hear traffic announcements played from the source that was active last (either DAB or radio). Setting the volume for traffic announcements Press the MENU button 8. Keep pressing the or button : until "TA VOLUME" appears in the display. Set the volume using the buttons :. and When you have finished making your changes, press the MENU button 8 or OK ; twice. Note: Using the volume control 2, you can also adjust the volume during a traffic announcement for the duration of that announcement. 66 TMC TMC for dynamic navigation systems TMC stands for "Traffic Message Channel. " Traffic information announcements are broadcast digitally using TMC, which means they can be used by compatible navigation systems during route planning. Your car radio has a TMC output which you can use for connecting Blaupunkt navigation systems. You can find out from your Blaupunkt dealer which navigation systems can be used with your car radio. If a navigation system is connected and a TMC station is being received, TMC lights up in the display. If dynamic navigation is active, a TMC station will be tuned into automatically. Note: If the TMC function of a connected navigation device is activated, the "DAB-FM switching function" will be deactivated. CD MODE You can use this unit to play standard CDs with a diameter of 12 cm. CD singles with a diameter of 8 cm and contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH CD mode Switching to CD mode If there is no CD inserted in the drive, press the button 9. Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. Gently close the control panel whilst exerting a little pressure until you feel it click into place. Keep pressing the SRC button @ until "CD" appears in the display. Playback begins from the point at which it was last interrupted. 67 CD MODE Selecting tracks Press one of the arrow buttons : to select the next or previous track. If you press the or button : once, the current track will be played again from the beginning. For further details, please read the section entitled "Setting the scantime" in the "Radio mode" chapter. Stopping SCAN and continuing playback Fast track selection To quickly select tracks backwards or forwards, To stop scanning, press the OK button ;. The currently scanned track will then continue to be played normally. keep one of the / buttons : pressed until fast-reverse / fast-forward track selection begins. Fast searching (audible) To fast search backwards or forwards, Repeating tracks (REPEAT) If you want to repeat a track, press button 4 RPT >. [. . . ] The selected boost level appears in the display alongside "LOUD". "LOUD 6" is the maximum boost level; "LOUD 0" means that loudness is deactivated. Press the Notes on adjusting the settings We recommend you use a CD that you are familiar with for making changes to the settings. Before adjusting the equalizer, set the sound and volume distribution settings to zero and deactivate loudness. For further details, refer to the chapter entitled "Sound and volume distribution settings". When you have finished making your changes, press the MENU button 8. Listen to the CD. [. . . ]