User manual BLAUPUNKT VANCOUVER CD35

[. . . ] Radio / CD Bristol CD35 Vancouver CD35 7 645 075 310 7 645 070 310 Operating instructions http://www. blaupunkt. com 2 1 3 4 5 6 7 13 12 11 10 9 8 2 CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 6 7 8 9 : ; Button to switch the device on/ off and operate the volume mute function. Volume control CD compartment AUDIO button to adjust the bass, treble, balance and fader. Arrow buttons X-BASS button to activate/deactivate and adjust the X-BASS. TRAF RDS button Short press: Switch traffic-information standby on/off. [. . . ] After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank. Setting the scanning time Press the MENU button 7. Press the or button 8 repeatedly until "SCAN TIME" appears in the display. Set the desired scanning time using the buttons 8. When you have finished adjusting the setting, Listening to stored stations Select the memory bank or waveband. press the MENU button 7 twice. Note: The scanning time that you set is also used when scanning in CD mode and in CD-changer mode. Press the station button 1 - 6 ; that corresponds to the station that you want to listen to. Scanning receivable stations (SCAN) You can use the scan function to listen to all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds (in steps of 5 seconds). Starting SCAN Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Press and hold down the MENU button 7 for longer than two seconds. 34 RADIO MODE DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH You can use the PTY function to select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Notes: If the tuner does not find a station that matches the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CDchanger mode to the station whose programme type matches the one you selected. Switching PTY on/off Selecting the PTY language You can select the language in which the programme types are displayed. The following are available: "DEUTSCH", "ENGLISH" and "FRANÇAIS". Press the MENU button 7. Press the or button 8 repeatedly until "PTY LANG" appears in the display. Set your preferred language using buttons 8. the When you have finished adjusting the setting, press the MENU button 7 twice. Selecting a programme type and starting seek tuning Press the or button 8. The current programme type appears in the display. If you want to select another programme type, you can do so by pressing the or button 8 whilst this display is visible. The radio will then tune into the next station it finds that matches your selected programme type. Press the MENU button 7. Press the or button 8 repeatedly until "PTY ON" or "PTY OFF" appears in the display. Press the Press the or button 8 to switch PTY ON or OFF. Press the MENU button 7. 35 RADIO MODE Optimising radio reception HICUT The HICUT function improves reception during poor radio reception (only FM). Press the or button 8 repeatedly until "TUN DISP" appears in the display. Press the or button 8 to switch between "CLOCK" and "FREQUENCY". Press the MENU button 7. Press the or button 8 repeatedly until "HICUT" appears in the display. "HICUT 0" means that the interference level will not be cut automatically. "HICUT 1" means that it will be cut automatically. Press the MENU button 7 twice. Press the Press the MENU button 7. Configuring the display In radio mode you have the option of displaying the waveband together with the memory bank / memory location and the time or the station name / frequency of the current station. Select "FREQUENCY" to display the station name / frequency or select "CLOCK" to display the waveband together with the memory bank / memory location and the clock time. 36 TRAFFIC INFORMATION Your device is equipped with an RDSEON receiver. [. . . ] When you have finished adjusting the setting, Press the press the AUDIO button 6. Press the button 8 repeatedly until "FADER" appears in the display. or button 8 to adjust the fader (front/rear). When you have finished adjusting the setting, Press the press the AUDIO button 6. 44 X-BASS X-BASS You can use the X-Bass feature to boost the bass at low volume levels. The selected X-Bass setting affects all the audio sources (radio, CD, CD changer or AUX). Adjusting the X-BASS boost LEVEL DISPLAY DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Configuring the level display The level display temporarily provides you with a symbolic representation of the volume and audio settings whilst you are adjusting them. [. . . ]