User manual BLAUPUNKT TAMPA BAY CD51

[. . . ] Radio / CD Miami Beach CD51 Tampa Bay CD51 Operating instructions Open here Ouvrir s. v. p. Por favor, abrir Favor abrir 2 1 2 3 4 16 15 5 6 14 7 13 12 11 10 8 9 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH CONTROLS 1 2 3 4 5 6 7 8 9 : button ­ to unlock the removable control panel (release panel) Volume control Button ­ switches the unit on/off, volume mute FM button ­ selects the radio mode source, selects the FM memory levels AM button ­ selects the radio mode source, selects the AM frequency range Display button ­ displays the time, DIS ­ changes the display content MENU button ­ opens the basic settings menu button ­ opens the fliprelease panel Arrow buttons ; < = > ?@ OK button ­ confirms menu entries and starts the scan function X-BASS button ­ to set the X-Bass feature AUDIO button (audio) ­ adjusts the bass, treble, balance and fader Keys 1 - 6 TS button ­ starts the Travelstore function CD·C button ­ to switch between CD, CD changer (if connected) and AUX sources 4 TABLE OF CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Notes and accessories . . . . . . . . . . . . [. . . ] Keep pressing the or button : until "SENS HI" or "SENS LO" appears in the display. "SENS LO" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, "lo" lights up in the display. Selecting the frequency range / memory This unit can receive programmes broadcast over the FM and AM frequency ranges. When you have finished making your changes, press the MENU button 8 or OK ; twice. Note: The set scantime also applies to scanning in CD and CD changer mode. Press the preset station button 1-6 > of the station you want to listen to. Tuner configuration This unit is equipped with a multiband tuner. The tuner can be configured to suit the requirements that are specific to various countries. The countries/regions available are: America, Europe, Asia and Thailand. The tuner will only function optimally if it is configured for the country/region in which the unit is being operated. Configuring the tuner Scanning receivable stations (SCAN) You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN Keep the OK button ; pressed until the scan process starts. "SCAN" appears briefly in the display followed by the current frequency (which flashes). Keep pressing the or button : until "FM TUNER" appears in the display. RADIO MODE or button : to set the country/region. When you have finished making your changes, CD MODE You can use this unit to play standard CDs with a diameter of 5 inches. CD singles with a diameter of 3 inches and contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Press the CD mode press the MENU button 8 or OK ; twice. Note: Once you have configured the tuner, the unit will switch to radio mode and tune into the preset frequency 87. 5 MHz Setting the display In radio mode, you have the option of continuously displaying the time or continuously displaying the frequency. Switching to CD mode If there is no CD inserted in the drive, press the button 9. Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. Gently close the control panel whilst exerting a little pressure until you feel it click into place. Keep pressing the CD·C button @ until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Keep the / DIS button 7 pressed until the required display appears. 13 CD MODE Selecting tracks Press one of the arrow buttons : to select the next or previous track. If you press the or button : once, the current track will be played again from the beginning. [. . . ] When you have finished making your changes, Press the press the AUDIO button =. Adjusting the treble settings Press the AUDIO button =. "BASS" appears in the display. press the AUDIO button =. Setting the front/back volume distribution (fader) To set the front/back volume distribution (fader), press the AUDIO button =. "BASS" appears in the display. Keep pressing the button : until "TREBLE" appears in the display. Keep pressing the Press the Press the or button : to adjust the treble. [. . . ]