User manual BLAUPUNKT SYLT CD50

[. . . ] 37 Playing tracks in random order (MIX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Repeating individual tracks (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Traffic radio information during CD playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Audible fast forward/reverse (CUE/ REVIEW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] "0" means the beep volume is off, "9" means the beep volume is adjusted to the maximum volume. tings, press MENU MENU 8 or OK ;. Switching to the radio mode If you are currently using the CD player or CD changer, Once you have adjusted the set- press CD·C @ repeatedly until "RADIO" appears in the display. Special RDS functions (AF, REG) The special RDS functions for AF (Alternate Frequency) and REG (REGional) improve the performance of your car radio. If this RDS function is activated, the car radio continuously searches in the background for the frequency with the best reception for the station you have tuned into. A number of radio stations broadcast different regional programming at different times of the day. Use REG to prevent your car radio from tuning into alternate frequencies which might have different programming. 31 RADIO OPERATION Note: It is necessary to activate/deactivate REG in the menu. Switching REG on/off Tuning into radio stations You can tune into radio stations in a number of different ways. "OFF" or "ON" will appear next to "REG". Press or :. The radio will tune into the next available station within reception range. Manual station selection You can also tune into radio stations manually. Press or on. or : to switch REG off Press MENU 8 or OK ;. Switching RDS functions on/off Press or :. To take advantage of the RDS functions for AF and REG, press RDS 4. When the RDS functions have been activated, "RDS" will light up as a symbol in the display. When you activate the functions, "REG ON" or "REG OFF" will appear briefly in the display. Note: You cannot use manual tuning unless the RDS functions are deactivated. Paging through the broadcasting network (for FM only) If a radio broadcasting network has more than one station, you can page through the "station network". Selecting wavebands/memory banks Using this car audio system, you can tune into radio stations on the FM, MW and LW (AM) wavebands. if you are listening to a CD, leave the reception area of the traffic information station you are tuned into and the seek tuning function is unable to find another traffic information station. if you switch from a traffic information station to a station which does not broadcast traffic information. Then either switch off traffic information priority or switch to a different traffic information station. Adjusting the volume for traffic announcements Press MENU 8. Press : repeatedly until "TA VOLUME" appears in the display. Press : to adjust the traffic announcement volume. ting, press MENU 8 or OK ;. Once you have adjusted the set- 36 CD PLAYER OPERATION The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm. CD singles with a diameter of 8 cm and contour CDs (shape CDs) are not suitable for use with this CD player. We assume no liability for any damage done to the CD player resulting from the use of unsuitable CDs. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH CD player operation Selecting tracks Press a key on the cursor block : to select the next or the previous track. or : once to restart the Press same track. Audible fast forward/reverse (CUE/REVIEW) To start Cue or Review, press and hold down either : until the process begins. or Starting CD player operation If there is no CD in the player, 9. press Playing tracks in random order (MIX) Press 5 MIX >. "MIX CD" will appear briefly in the display, the MIX symbol will light up in the display. Stopping the MIX function The flip release panel will open. Insert a CD into the player with the label facing up until you feel resistance. Do not attempt to assist or prevent this process. Press 5 MIX > again. "MIX OFF" will appear briefly in the display and the MIX symbol will no longer light up. Press the operating panel closed gently until you feel it click into place. If there already is a CD inserted into the player, Scanning tracks (SCAN) You can scan all of the tracks on the CD. Press OK ; for longer than two seconds. [. . . ] "BASS" will appear in the display. Adjusting Loudness intensity The Loudness boost can be set in stages from one to six. Press MENU 8. "MENU" will appear in the display. Press Press : until "TREBLE" appears in the display. or : to alter the treble. Press Adjusting the balance To adjust the balance, press AUD / LD =. "BASS" will appear in the display. : repeatedly until "LOUDNESS" appears in the display. or : to alter the Loudness setting. Press Once you have completed adjusting the settings, press MENU 8 or OK ;. Press Press ance. : until "BALANCE" appears in the display. [. . . ]