User manual BLAUPUNKT STUTTGART

[. . . ] These instructions contain important information to easily and safely install and operate the car sound system. ⷠRead these instructions carefully and completely before using the car sound system. ⷠKeep the instructions at a location so that they are always accessible to all users. ⷠAlways pass on the car sound system to third parties together with these instructions. [. . . ] U Press the / button 7 once or several times to select a different track. Instead of the arrow keys 7, you use the volume control 4 to select list entries: Function Selecting entries in lists Confirming entries Return to the higher level Browse mode / 7 7 7 Bluetooth® (Heidelberg 220 BT only) You can connect the car sound system via Bluetooth® with other Bluetooth®-ready devices, such as cell phones or MP3 players. This allows you to use the car sound system with its integrated microphone as hands-free system for connected cell phones and control the audio output of other Bluetooth® devices and play them back via the loudspeakers of the car sound system (Bluetooth® streaming). bluetooth® technology is a wireless connection of short range. For this reason, Bluetooth® devices must be located near the car sound system (in the vehicle) to establish and maintain a connection. To establish a Bluetooth® connection, you must first pair the car sound system and the Bluetooth® device. When you pair the devices, a Bluetooth® connection is subsequently established automatically. This connection remains in effect as long as the Bluetooth® device is within range. Because you moved the cell phone outside the range, the connection is automatically re-established as soon as you are back within range. You can connect only one cell phone and streaming device with the car sound system at a time. If you connect a new device with the car sound system, the connection to a currently connected device may automatically be interrupted. Pairing and connecting a Bluetooth® streaming device Note: If a connection with a streaming device currently exists, this connection is automatically disconnected if you pair and connect another streaming device. U In the Bluetooth® menu, select the "PAIRING" menu item. The display shows the currently stored PIN (default "1234"). If required, enter the PIN of the streaming device: Pairing and connecting a device Note: You can pair up to 5 Bluetooth® devices with this car sound system. If you register a sixth one, the Bluetooth® device registered first is unregistered. Pairing and connecting a cell phone Note: If a connection with a cell phone currently exists, this connection is automatically disconnected if you pair and connect another cell phone. U In the Bluetooth® menu, select the "PAIRING" menu item. 14 Bluetooth® u Turn the volume control 4 to select a digit for the respective position. U Press the button 7 repeatedly until you reach past the last position to confirm the PIN entered. Note: Not all streaming devices require the entry of a PIN on the car sound system. For some streaming devices, you have to enter the PIN of the car sound system instead. [. . . ] Making settings in the "CLOCK" menu CLK DISP Switch the permanent display of the time on or off. If the permanent display of the time is switched on, the time is shown on the display. The display of the respective audio source is shown only after pressing a button. Approximately 16 seconds after the button is pressed last, the time is displayed again. [. . . ]