User manual BLAUPUNKT ST. LOUIS CC24

[. . . ] Avoid making direct skin contact with the control panel's contacts. If necessary, clean the contacts with a lint-free cloth and some alcohol. Note: When attaching the control panel, make sure you do not press on the display. If the unit was still switched on when you removed the control panel, the unit will automatically switch back on with the last settings activated i. [. . . ] The system volume can be adjusted in steps from 0 (off) to 100 (maximum). To help you adjusting the volume more easily, the volume will be increased / decreased as you make your changes. When you have finished making your changes, The unit can only be switched on when the ignition is turned on. You can instantaneously reduce the volume (mute) to a level preset by you. If you are in CC or CD changer mode (CD changer only with the Lexington C32), When you have finished making your changes, Button until the radio mode appears in the display together with the memory bank and frequency. This unit can receive programs broadcast over the FM and AM frequency band. There are three preset memory bank for the FM range and one for the AM range. Selecting the FM memory bank To switch between the FM memory bank FM1, FM2 and FMT, press the BAND/TS button =. Selecting the AM waveband To select the AM waveband, keep pressing the BAND/TS button = until AM appears in the display. If your unit is connected to a mobile telephone, the car radio's volume will be muted as soon as you "pick up" the telephone. This requires to the mobile telephone be connected to the car radio as described in the installation instructions. Scanning tracks on the current CD To briefly play all the tracks on the current CD in ascending order, press button 2 (SCAN) <. Once the minutes are set, Displaying the time when the unit is off and the ignition is on To display the clock when the unit is off and the ignition is on, When you have finished making your changes, press the MENU button 8 twice. To move the volume distribution toward the right, turn the volume control 3 clockwise. To move the volume distribution toward the left, turn the volume control 3 anticlockwise. When you have finished making your changes, wait 8 seconds, the settings are saved and the audio source display appears. When you have finished making your changes, wait 8 seconds, the settings are saved and the audio source display appears. To adjust the TREBLE, keep pressing the AUDIO : button until "TRE" appears in the display. When you have finished making your changes, wait 8 seconds, the settings are saved and the audio source display appears. To move the volume distribution toward the back, turn the volume control 3 clockwise. To move the volume distribution toward the front, turn the volume control 3 anticlockwise. When you have finished making your changes, wait 8 seconds, the settings are saved and the audio source display appears. [. . . ] To activate X-BASS, keep the EQ/X-BASS button ; pressed until "XBASS ON" appears in the display. To deactivate X-BASS, keep the EQ/X-BASS button ; pressed until "XBASS OFF" appears in the display. You can select preset sound effect for the following styles of music: CLASSIC POP M ROCK M The settings for these music styles have already been programmed. To select one of the sound presets, keep pressing the EQ/X-BASS button ; until the required setting appears in the display. [. . . ]