User manual BLAUPUNKT SEATTLE MP74

[. . . ] Radio / CD / MP3 Los Angeles MP74 US Seattle MP74 US Operating instructions 7 644 816 310 7 644 811 310 http://www. blaupunkt. com Caution: The device's tuner is already configured at the factory for the North/South America region ("AREA USA"). If you are outside North/South America, please select the "AREA EUR" setting. For further details, please read the section entitled "Adjusting the tuner settings" in the "Radio mode" chapter. Attention : Le récepteur de l'autoradio est réglé par défaut sur la région Amérique du Nord / Amérique latine (« AREA USA »). [. . . ] The radio functions menu appears in the display. Press the TUNER button = while in radio mode. The first page of the radio functions menu is displayed. Repeatedly press the softkey 5 assigned to the "R-TEXT" display item until the "RADIO TEXT ON" or "RADIO TEXT OFF" setting that you want is displayed. Press the NEXT button 4. Repeatedly press the softkey 5 assigned to the "HIGH CUT" display item until the setting that you want appears in the display. "HICUT 0" means that no automatic reduction of the treble and interference level will be made; "HICUT 2" means that a maximum reduction will be made. Press the TUNER button = or the joystick OK 8. The settings are saved. Press the joystick OK 8 or the TUNER button = to close the menu. The settings are saved. 21 CD MODE CD mode You can use this device to play standard CDs with a diameter of 12 cm. CDRs and CD-RWs (CDs that you have "burned" yourself) can generally also be played. Due to the varying quality of CD blanks, Blaupunkt cannot guarantee that this will work properly. To avoid problems when playing CDs, you should not burn CDs at speeds greater than 16-speed. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!CD singles with a diameter of 8 cm and non-circular contoured CDs (shape CDs) must not be used. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. If a CD is already inserted in the device, press the SOURCE button < repeatedly until CD mode is displayed. The CD menu appears and playback begins from the point at which it was last interrupted. Ejecting a CD press the button 7. The control panel opens out towards you and the CD is ejected. Carefully remove the CD. Press the button 7. The control panel closes. Selecting tracks Move the joystick 8 in one direction (up or right for the next track or down or left for the previous track) until the number of the track that you want appears in the display. If you press the joystick 8 downwards once or to the left once, the current track will be played again from the beginning. Switching to CD mode and inserting a CD If there is no CD inserted in the device yet, button 7. press the The control panel opens out towards you. Insert the CD with the printed side uppermost into the CD compartment. 22 CD MODE To fast search backwards or forwards, You can briefly play (scan) all the tracks on the CD. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Fast searching (audible) press and hold down the joystick 8 in one direction (up or right for forwards or down or left for backwards) until fast searching begins. Scanning tracks (SCAN) Press and hold down the joystick OK 8 for longer than two seconds. The subsequent tracks on the CD are briefly played in ascending order. For further details, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter. Cancelling SCAN and continuing listening to a track To cancel scanning, Random track play (MIX) Press the softkey 5 assigned to the "MIX" display item. Cancelling MIX Press the softkey 5 assigned to the "MIX" display item again. [. . . ] The "AMP ON" softkey will be displayed with a dark background if the internal amplifier is switched on. Press the softkey 5 assigned to the "AUX1" display item if no CD changer is connected and you want to connect an external audio source. By pressing the "AUX1" softkey you can switch between the "AUXILIARY 1 ON" and "AUXILIARY 1 OFF" settings. Press the joystick OK 8 or the MENU button 9 to close the menu. The settings are saved. 38 EXTERNAL AUDIO SOURCES the "AUX2" display item. By pressing the "AUX2" softkey you can switch between the "AUXILIARY 2 ON" and "AUXILIARY 2 OFF" settings. [. . . ]