User manual BLAUPUNKT SAN REMO CD31

[. . . ] Radio / CD Konstanz CD31 San Remo CD31 Santa Cruz CD31 Operating instructions Bitte aufklappen Open here Ouvrir s. v. p. Öppna Por favor, abrir Favor abrir 2 1 2 14 13 3 12 4 5 11 10 6 9 7 8 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL BEDIENELEMENTE DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 6 7 button to release the control panel. FMT button (Konstanz CD31) to select the FM memory levels, to switch to radio mode, to start the Travelstore function. BAND button (San Remo CD31 and Santa Cruz CD31), to select the FM memory levels and MW / LW frequency range, to switch to radio mode, TS, to start the Travelstore function. [. . . ] If "SENS LO" is selected, "lo" lights up in the display. È Set the required sensitivity using the and buttons 9. È Press the MENU button :. Tuning into stations manually You can also tune into stations manually. Note: q You can only tune into stations manually if the RDS function is deactivated. Tuning into a station There are various ways of tuning into a station. Automatic seek tuning È Press the or button 9. The unit tunes into the next receivable station. È Press the or button 9. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". 33 RADIO MODE Note: q If you want to use this feature, the RDS function must be activated. or button 9 to switch to the next station on the broadcasting network. When using this feature, you will only be able to switch to stations that you have received once already. To do so, use either the Travelstore function or allow the automatic seek tuning feature to run once through the entire frequency range. After the process is completed, the station stored in FMT memory location 1 will be played. È Press the Switching to preset stations È Select the memory level on which the station was stored. È Press the preset station button of the station you want to listen to. Scanning receivable stations (SCAN) You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN Storing stations Storing stations manually È Select the required FM1 / FM2 / FMT memory or MW / LW frequency range (MW and LW are not available on the Konstanz CD31). È Press the SCAN button 4. Scanning begins. "SCAN" appears briefly in the display followed by the current frequency (which flashes). Stopping SCAN and continuing listening to a station È Tune into the station. È Press one of the station buttons 1 5 ; for longer than one second to store the station to that button. Storing stations automatically (Travelstore) You can automatically store the five stations with the strongest reception in the region (only for FM). Note: q Stations that were previously stored in this memory are deleted in the process. È Press the SCAN button 4 again. Scanning is stopped and the station that was tuned into last will remain active. È Keep the FMT or BAND (TS) button 2 pressed for longer than two seconds. 34 RADIO MODE Setting the scantime È Press the MENU button :. È Keep pressing the or button 9 until "SCANTIME" appears in the display. Note: If no station is found that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. q If the tuned radio station or another station on the broadcasting network broadcasts the required programme type at a later point in time, the radio automatically switches from the currently tuned station or from CD mode / CD changer mode to the station whose programme type matches the one you selected. q È Set the required scantime using the and buttons 9. When you have finished making your changes, È press the MENU button : twice. q Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK MUSIC Using the PTY function, you can directly select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. È Keep the TRAF (PTY) button < pressed until "PTY" appears in or disappears from the display. The programme type appears briefly in the display when you switch PTY on. [. . . ] When you have finished making your changes, È Press the È press the button 9. È press the MENU button :. Briefly displaying the time when the unit is switched off To briefly display the time when the unit is off, The hours flash on and off. When you have finished making your changes, È Adjust the hours using the È press the MENU ( ) button :. The time is displayed for around 8 seconds. È press the MENU button : twice. Selecting 12/24-hour clock mode È Press the MENU button :. "MENU" appears in the display. È Keep pressing the or button 9 until "24 H MODE" or "12 H MODE" appears in the display. 42 SOUND Sound Adjusting the bass settings To adjust the BASS, VOLUME DISTRIBUTION Adjusting the balance settings To adjust the left/right volume distribution (balance), DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Volume distribution È press the AUDIO button 8. "BASS" appears in the display. È press the AUDIO button 8. "BASS" appears in the display. È Press the or just the bass. button 9 to ad- È Keep pressing the È Press the Adjusting the treble settings To adjust the TREBLE, or button 9 until "BAL" appears in the display. [. . . ]