User manual BLAUPUNKT SAN DIEGO AUSLAND AG

[. . . ] Radio / Cassette / Changer San Diego DJ A Operating instructions 14 13 12 11 10 1 9 2 3 4 5 6 7 8 2 Quick reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Re-start following an interruption of the power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Receiving traffic programme stations with RDS-EON. . . . . . . . . . . . . . . . 32 Automatic seek tuning start (tape and CD changer operation) . . . . . . . . . [. . . ] "SEARCH" will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely. If the sound quality of the selected programme deteriorates appreciably: · Tune into another station. REG OFF ­ the radio automatically tunes to the regional programme offering the best reception quality (but maybe with local information for another service area). If the REG function is active, "REG ON" will be briefly displayed each time you turn the radio on. Selecting a waveband You can select between the following wavebands: FRANÇAIS ENGLISH DEUTSCH Radio operation with RDS (Radio Data System) Station tuning Automatic tuning · / Press / ; the car radio will automatically search for the next station. If you hold down the upper or lower part / of the rocker switch, seek tuning will speed up in the upwards or downwards direction. Manual tuning: · Press << >>; the frequency will change in short intervals in the downwards or upwards direction. If you hold down the right or left part of the rocker switch, the frequency scan will speed up. Changing the memory bank (FM) You can shift between the memory banks I, II and T in order to store stations and recall them later. · Press the TS/BND button as many times as necessary until the desired memory bank lights up in the display. Scrolling through the broadcast networks (only FM) You can use the << >> buttons to tune in stations of your reception area. If several programmes of the broadcast networks can be received, you can scroll through them forwards by pressing >>, or backwards using the << button, e. g. For this it is necessary that the stations have been tuned in at least once and that "AF" is active (lights up in the display). using Travelstore: · Press TS/BND for 1 sec. ; the system starts to run through the frequency band. If "AF" does not light up, · Press AF/TA for approximately 1 sec. This fulfils the requirements for selecting stations with << >>. Storing stations On FM, you can store five stations on the preset buttons 1, 2, 3, 4, 5 for each of the memory banks I, II and T. · · Tune in a station with the rocker switch (either automatically or manually). Automatic tuning Up Down Down in short intervals (if "AF" is off) Up in short intervals (if "AF" is off) Manual tuning with << >> You can also tune in a station manually. If necessary, deactivate AF: · Press AF/TA for approximately 1 sec. Press and hold down the desired preset button until the radio resumes play after the muting (takes approximately 1 sec. , confirmed by a beep). The activated preset button is indicated in the display. 30 Scanning stored stations with Preset Scan You can have all of the stored stations briefly scanned. All of the stored stations to be received in the selected waveband will be scanned one after the other. On FM, the radio will either scan the stations stored on memory bank I and II or T. To select a scanned station and switch off Preset Scan: · Press SC/SRC for about 1 second. Note: If "TA" shows on the display panel, the system will scan the stored traffic stations only. Recalling stored stations You can recall any stored station at the touch of a button. · Select the memory bank with TS/BND. Selecting the seek tuning sensitivity You can alter the automatic seek tuning sensitivity. If "lo" is displayed, the radio will only pick up strong, local stations. 31 PORTUGUÊS To turn Loudness on/off: · Press AUD for about 1 second. "LD" appears in the dislay, if the Loudness function is activated. For more information please refer to "DSC programming". ESPAÑOL You can automatically store the five most powerful FM stations of your current reception area sorted according to their signal strength. [. . . ] To start the Scan function: · Press SC/SRC for approximately 1 second. To stop the Scan function: · Press SC/SRC for approximately 1 second. SCAN will also be terminated by · pressing one of the buttons AUD, DSC, << >> or / . TIME ­ To switch the display mode: · Press DSC. · Use << >> to adjust to "NUMBER" or "TIME". 36 / << >> Select function Adjust/recall value 37 PORTUGUÊS RM ON/OFF (Radio Monitor) (RM ON/OFF appears only in the cassette mode) Allows you to listen to the radio during fast winding of the tape. [. . . ]