User manual BLAUPUNKT SAN FRANCISCO CD70

[. . . ] Radio / CD San Francisco CD70 Operating instructions Open here Ouvrir s. v. p. Por favor, abrir Favor abrir 2 1 14 2 13 3 12 4 11 10 5 9 8 6 7 3 ESPAÑOL SVENSKA NEDERLANDS PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH PORTUGUÊS CONTROLS 1 2 3 4 5 6 7 8 9 : ; < = button - opens the operating panel Button - switches the radio and mute function on/off Volume control Soft keys - the function of the soft keys depends on the current content of the display OK button - confirms menu entries and leaves the menu DSA button - selects the DSA menu Multifunction rocker switch MENU button - selects the menu for basic settings AUD button - adjusts bass and treble, balance and fader as well as loudness DIS button - changes display contents Display CD button - starts CD playback CDC button - starts CD changer playback (only if connected) or plays an external audio source (only if connected) TUNE button - activates radio mode Selects the radio function menu (only possible in radio mode) > 4 TABLE OF CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ENGLISH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS PORTUGUÊS ESPAÑOL FRANÇAIS Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 "Training" a new KeyCard / entering the master code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the soft key 4 with the display allocation "TUN". Press the soft key 4 with the display allocation "HCUT". 19 RADIO MODE Switching between stereo and mono In the event of poor reception, you can select radio playback in mono. After each time the car radio is switched on, playback is in stereo. Selecting radio text display Some stations also use the RDS signal to broadcast running text, so-called "radio text". You can permit or block radio text display. In radio mode, press the TUNE button >. The Radio Function menu will appear on the display. in radio mode, press the TUNE button >. The Radio Function menu will appear on the display. Press the soft key 4 with the display allocation "NEXT". The "second page" of the Radio Function menu will appear on the display. Press the soft key 4 with the display allocation "NEXT". The "second page" of the Radio Function menu will appear on the display. Press the soft key 4 with the display allocation "RTXT". If the radio text function is active, an arrow symbol will appear in front of "RTXT". Press the soft key 4 with the display allocation "MONO". The current status "MONO" or "STEREO" will appear briefly on the display. If "MONO" is activated, an arrow symbol will appear next to "MONO". Press the TUNE button > or wait for eight seconds. The settings are now stored. Press the TUNE button > or wait eight seconds. The settings are now stored. Naming a station You can assign to a stored station your own, four-character name that will be shown on the display. Changing the display You can change what is shown on the display. The top line of the display (headline) can be toggled to show the station name, frequency, programme type, or time. Press the MENU button 8. Press the soft key 4 with the display allocation "TUN". Press the DIS button : repeatedly until the desired information (station name, frequency, programme type, or time) appears in the headline. Press the soft key 4 with the display allocation "NAME". If the selected station has not been assigned a name yet, four underline characters will appear on the display. The current input position will blink. Use the soft key 4 with the display allocation "PREV" or "NEXT" (for the previous or next stored station in the memory bank) to select the station that you want to name. 20 RADIO MODE location "PREV" or "NEXT" (for the previous or next stored station in the memory bank) to select the station for which you want to reset the name. ENGLISH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS PORTUGUÊS ESPAÑOL FRANÇAIS Use the / buttons 7 to select your character. If a character should remain vacant, select the underline character. Use the soft key 4 with the display al- Use the or button 7 to change the input position. 5. To store the name, press the OK button Press the OK button 5 to return to the previous menu level or the MENU button 8 to leave the menu altogether. Deleting station names Press the soft key 4 with the display allocation "DEF". The station name is reset to the abbreviation of the RDS station name. Press the MENU button 8. Press the soft key 4 with the display allocation "TUN". Press the soft key 4 with the display allocation "NAME". Now you are in edit mode. Use the soft key 4 with the display allocation "PREV" or "NEXT" (for the previous or next stored station in the memory bank) to select the station for which you want to delete the name. Press the soft key 4 with the display allocation "CLR". [. . . ] The switch-on delay can be set at between 250 ms ("DELAY 1") to 2. 25 seconds ("DELAY 9"). Press the MENU button 8. Press the soft key 4 with the display allocation "VAR". Press the soft key 4 with the display allocation "DLAY". Press the or button 7 to set the switch-on delay. Press the OK button 5 to return to the previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored. 34 SUBOUT/SUBWOOFER HIGH-PASS FILTER ENGLISH Subout/subwoofer Setting the frequency and level for the subwoofer You can set the frequency and amplifier level for a connected subwoofer. The settings you make depend on the hifi system in your car and the power of your subwoofer. [. . . ]