User manual BLAUPUNKT PA4100

[. . . ] 49 Traffic announcements with CD operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 "Training" a second KeyCard / Replacing the KeyCard . . . . . . . . . . . . . . . . . . . . . . . . . 37 Training a new KeyCard / entering the master code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 CD changer operation (optional) 52 Starting CD changer operation . . . . . . . . . . . . . . [. . . ] If you want to change to a different program type press the or button, 7, as often as necessary, until the desired program type is displayed. 45 RADIO OPERATION Or Optimising radio reception Treble cut in the presence of interference (HICUT) The HICUT function improves the sound when radio reception is poor. When interference is being received, the treble is automatically cut, which therefore also reduces the level of interference. Adjusting HICUT In order to select a saved program type, press one of the softkeys, 4, indicating "ST1" to "ST6". In order to start the search press the or button, 7. The next receivable station with the selected program type is tuned in. Note: If no station is found with the chosen program type, a beep is sounded, and the display briefly shows "NO PTY". Storing the program type on the station button Press the MENU button, 8. Press the or button, 7, as often as is necessary for "HICUT" to appear in the display. "NO HICUT" means that the function is inactive, while "HICUT 3" indicates the strongest automatic reduction of the treble and the interference. Press the Select a program type with the button, 7. or In order to save a program type, hold down one of the softkeys, 4, indicating "ST1" to "ST6", for more than one second. Setting the PTY language You can select the language in which program types are displayed. Press the OK button, 5 or the MENU button, 8, to leave the menu. Bandwidth selection in the presence of interference (SHARX) The SHARX function provides you with the facility of eliminating interference from neighbouring stations as far as possible. No responsibility can be accepted for damage to the CD drive through the use of unsuitable CDs. Adjust the volume with the 7, or with the volume control. buttons, Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Starting CD operation and inserting the CD If there is no CD in the drive button, 1. press the The control unit opens. Insert the CD with the printed side upwards gently into the drive until you can feel some resistance. As the CD is drawn in it must neither be held back nor supported. Close the control unit with gentle pressure until you feel it latch. If there is already a CD in the drive press the CD button, <. The CD menu is displayed, and play begins from the point where it was last interrupted. 48 CD OPERATION Press the Press the button, 1. You can hear a brief sample from all the tracks on the CD. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Removing the CD The control unit opens to the front. The CD is ejected. Scanning tracks (SCAN) Press the softkey, 4, indicating "SCA". "SCAN" appears in the display. For information on setting the sampling duration, read the paragraphs on "Adjusting the Sample Duration" in the "Radio Operation" section. Stopping the SCAN to continue listening to a track Carefully remove the CD. Note: If you do not remove the CD within 30 seconds it will be drawn back into the drive. Selecting a track Press one of the buttons in the arrow button group, 7, as often as needed for the number of the desired track to appear in the display. If the or button, 7, is pressed once the current track will be started again. Press the softkey, 4, indicating "SCA" again. The track that is currently being sampled will continue to be played. Fast searching (audible) In order to search rapidly backwards or forwards Repeating tracks (REPEAT) Press the softkey, 4, indicating "RPT". The title will be repeated until RPT is deactivated. Stopping REPEAT hold down one of the , or buttons, 7, until the fast search backwards of forwards starts. Press the softkey, 4, indicating "RPT" again. [. . . ] or buttons, 7, in order to switch the spectrometer on or off. Press the When you have completed all the set- Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Selecting the tone preset You can choose preset tone settings for the following musical styles. ROCK DISCO JAZZ CLASSIC VOCAL Settings for these styles have already been programmed. 57 EQUALIZER Equalizer adjustment guide Tone impression/problem Bass too quiet Action Bass boost with Filter: "LOW EQ" Frequency: 50 to 100 Hz Level :+4 to +6 Reduce lower middle tones with Filters: "LOW EQ", "MID EQ" Frequency: 125 to 400 Hz Level : approx. -4 Reduce middle tones with Filters: "MID EQ", "HIGH EQ" Frequency: 1, 000 to 2, 500 Hz Level : -4 to -6 Boost treble tones with Filter: "HIGH EQ" Frequency: approx. [. . . ]