User manual BLAUPUNKT MUMBAI MP26

[. . . ] Keys 1 - 6 Short press: BND button, to select the FM memory bank and the AM waveband, source selection to radio mode. 20 Displaying the time continuously when the unit is off and the ignition is on . Before using the device for the first time, please read these instructions carefully. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. [. . . ] You can set the scanning time to between 5 and 30 seconds in the menu. You can choose to continuous display one of the followings: Band and clock Band and Frequency Keep the button 5 pressed until the required display appears. You can use this unit to play standard CDs, CD-Rs and CD-RWs with a diameter of either 5 or 3 inches. Beside playing CDs containing audio data, CDs containing MP3 files can also be played on this device. Descriptions of the "MP3 mode" can be found after this chapter. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!We accept no liability for any damage to the CD drive or CD that may occur as a result of the use of unsuitable CDs. If a CD is already inserted in the drive and the unit is playing Radio, CD Changer or AUX mode. press the SRC button 5 repeatedly until "CD" appears in the display. If you press the or button 9 once, the current track will be played again from the beginning. To fast search backwards or forwards, buttons 9 keep one of the pressed until fast reversing / fast forwarding begins. If there is no CD inserted in the drive and the unit is playing Radio, CD Changer or AUX mode, gently insert CD with the printed side uppermost into the drive until you feel some resistance. The next track will then be played for scantime as set in the "Setting the scantime". For further details, please read the section entitled "Setting the scantime" in the "Radio mode" chapter. stopping SCAN and continuing playback To stop scanning , press the MENU button 4. The CD text may include the name of the performer, the album and the track name. You can have the CD text displayed as running text at every change of track. After the CD text has been displayed once, the standard display (as described in the "Changing the display" section) will be shown. "RPT TRCK" appears briefly in the display and the RPT symbol lights up. Cancelling repeat If you want to stop the repeat function, press button 4 RPT ; again. Press the button 5 for longer than two seconds until the required display appears. [. . . ] When you have finished making your changes, press the AUDIO button 6. When you have finished making your changes, press the AUDIO button 6. Three means that the X-Bass boost is set to maximum and OFF means that X-Bass is switched off. Press the button 9 repeatedly until one of the sound effect options or "EQ OFF" appears on the display. [. . . ]