User manual BLAUPUNKT MNCHEN RD 104

[. . . ] / For further connection configurations with other amplifiers, equalizer / amplifier or subwoofing, please contact your dealer! [. . . ] Remove the insulation from the ground cable and attach the forked cable lug (if necessary, solder it). Scratch off the paint from the contact area of the ground point and lubricate it with graphite grease (important for good ground contact). Install the car radio into the DIN cut-out provided in your car's dashboard ex factory. Prepare the car radio DIN cut-out (unlock shelf or dummy cover) or cut out the car radio compartment to 182 x 53 mm. Grasp behind the car radio cut-out and check how many of the fixing strips of the car radio support can be bent. Insert the support into the cut-out and bend the appropriate fixing strips with a screwdriver, see fig. Connect the positive cable together with distributor to pin 30 (constant power) or pin 15 (positive line connected via ignition) of the fuse holder behind the fuse. 5 mm2) to the battery (do not route the cable near the cable harnesses). [. . . ] Telephone Mute Quando o telephone chama ou entra em funcionamento, o som do aparelho é cortado automaticamente. [. . . ]