User manual BLAUPUNKT MUNCHEN MP 36

[. . . ] Radio CD MP3 München MP36 7 646 176 310 Operating and installation instructions http://www. blaupunkt. com 1 2 3 4 5 6 7 13 12 11 10 9 8 2 ee pae PYCC 1 / (Mute) . 2 3 - ( (Release-Panel)) - CD- . < BND·TS- : FM- . u . , , , . ( ) , "Blaupunkt". . 5 , "Blaupunkt" www. blaupunkt. com. [. . . ] u Press the MENU button 7. In radio mode you have the option of displaying the waveband together with the memory bank / memory location and the time or the station name / frequency of the current station. Select "FREQUENCY" to display the station name / frequency or select "CLOCK" to display the waveband together with the memory bank / memory location and the clock time. u Press the or button 8 repeatedly until "TUN DISP" appears in the display. u Press the or button 8 to switch between "CLOCK" and "FREQUENCY". u Press the MENU button 7 twice. 41 ENGLISH DEUTSCH Configuring the display Traffic information Traffic information Your device is equipped with an RDS-EON receiver. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme you were listening to before. · if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Setting the volume for traffic announcements u Press the MENU button 7. u Press the or button 8 repeatedly until "TA VOLUME" appears in the display. When you have finished adjusting the setting, u press the MENU button 7 twice. Notes: · You can use the volume control 4 to adjust the volume during a traffic announcement for the duration of that announcement. · You can set the volume distribution for the traffic announcements. For further details, please read the "Sound" chapter. Switching traffic information priority on/off u Briefly press the TRAF·RDS button :. Traffic announcement priority is active when the traffic jam symbol is shown in the display. Notes: You will hear a warning beep: · if you leave the reception area of a traffic information station that you are currently listening to. · if you are receiving a traffic information station and the volume is set to minimum (0) or if, whilst listening to a CD/MP3, a CD in the changer or an AUX source, you leave the reception area of the tuned traffic information station and the subsequent automatic search cannot find a new traffic information station. 42 CD mode You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Risk of severe damage to the CD drive! Contoured CDs (shape CDs) are not suitable for playback in this unit. We do not accept responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. For further details, please read the "MP3 mode" chapter. Selecting tracks u Press one of the arrow buttons 8 to select the next or previous track. If you press the or button 8 once, the current track will be played again from the beginning. Fast track selection For fast track selection (backwards or forwards), u press and hold down one of the buttons 8 until fast-reverse / fast-forward track selection begins. Switching to CD mode If there is no CD inserted in the drive, u gently push the CD with the printed side uppermost into the CD compartment 5 until you feel some resistance. [. . . ] Note: If the AUX input is activated, you can select it by pressing the SRC button =. "AUX INPUT" then appears in the display. 55 ENGLISH DEUTSCH Configuring the level display External audio sources Specifications Specifications Amplifier Output power: 4 x 25 watts sine in accordance with DIN 45 324 at 14. 4 V 4 x 45 watts max. power Tuner Wavebands in Europe: FM : 87. 5 - 108 MHz MW : 531 - 1 602 kHz LW : 153 - 279 kHz FM frequency response: 35 - 16, 000 Hz CD Frequency response: 20 - 20, 000 Hz Pre-amp out 4 channels: 2V Input sensitivity AUX input: 2 V / 6 k Weight: 1, 33 kg Subject to changes!56 · Installation instructions , , . [. . . ]