User manual BLAUPUNKT MILANO MP34

[. . . ] Radio / CD / MP3 Milano MP34 Santa Cruz MP34 Valencia MP34 Operating instructions 7 644 192 310 7 644 178 310 7 644 195 310 http://www. blaupunkt. com Open here 2 1 2 11 3 10 4 9 5 8 7 6 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 button for opening the detachable control panel (flip-release panel) Button to switch the device on/ off and operate the volume mute feature Volume control BND button (band) to select radio mode as the source, to select the FM memory banks and the MW and LW wavebands TS to start the Travelstore function AUDIO button to adjust the bass, treble, balance and fader. For adjusting the X-BASS function and activating/deactivating it. 6 7 8 9 : SRC button to switch between CD/MP3, CD changer (if connected) and AUX. Arrow buttons MENU button to open the basic settings menu Keys 1 - 6 TRAF button to switch traffic information standby on/off. button to eject the CD from the device ; 33 CONTENTS Notes and accessories . . . . . . . . . . [. . . ] Note: You will hear a warning sound: if you leave the reception area of a traffic information station that you are currently listening to. if, while listening to a CD/MP3 or CD in the changer, you leave the reception area of a traffic information station that the system is tuned into, and the subsequent automatic search cannot find a new traffic information station. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. press the MENU button 8 twice. Note: Using the volume control 3, you can also adjust the volume during a traffic announcement for the duration of that announcement. Note: You can adjust the sound settings and volume distribution settings for traffic announcements. For further details, refer to the chapter entitled "Sound". 45 CD MODE CD mode You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. Note: If the ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 2 in order to start playing the CD. If a CD is already inserted in the drive, press the SRC ( ) button 6 repeatedly until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Selecting tracks Press one of the arrow buttons 7 to select the next or previous track. If you press the or button 7 once, the player will play the current track again from the beginning. Switching to CD mode If there is no CD inserted in the drive, press the button 1. Gently insert the CD with its printed side uppermost into the drive until you feel some resistance. Gently close the control panel whilst exerting a little pressure until you feel it click into place. The CD starts playing. Fast track selection To quickly select tracks backwards or forwards, press and hold down one of the / buttons 7 until fast-reverse / fast-forward track selection begins. Fast searching (audible) To fast search backwards or forwards, press and hold down one of the buttons 7 until fast searching backwards / forwards begins. 46 CD MODE If you want to repeat a track, DEUTSCH Random track play (MIX) Press the 5 MIX button 9. "MIX CD" appears briefly in the display and the MIX symbol lights up. "MIX OFF" appears briefly in the display and the MIX symbol disappears. Repeating tracks (REPEAT) press the 4 RPT button 9. "RPT TRCK" appears briefly in the display and the RPT symbol lights up. Cancelling REPEAT If you want to deactivate the repeat function, Scanning tracks (SCAN) You can briefly play all the tracks on the CD. press the 4 RPT button 9 again. "RPT OFF" appears briefly in the display and the RPT symbol disappears. Normal playback is then resumed. Press and hold down the MENU button 8 for longer than two seconds. For further details, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter. Stopping SCAN and continuing listening to a track "PAUSE" appears in the display. Playback is resumed. Configuring the display You can choose between three display types for CD mode: · Track number and clock time ("CLOCK") · Track number and playing time ("PLAYTIME") · Track number and CD name ("CD NAME") ESPAÑOL DANSK PORTUGUÊS To stop scanning, press the MENU button 8. The currently scanned track will then continue to be played normally. Press the MENU button 8. 47 SVENSKA Press the 3 NEDERLANDS Pausing playback (PAUSE) Press the 3 button 9. ITALIANO FRANÇAIS ENGLISH CD MODE Press the or button 7 repeatedly until "CD DISP" appears in the display. or button 7 to switch between "PLAYTIME", "CLOCK" and "CD NAME". Traffic announcements in CD mode If you wish to receive traffic announcements in CD mode, Press the press the TRAF button :. Traffic announcement priority is active when a traffic-jam symbol lights up in the display. [. . . ] Adjusting the front/back volume distribution (fader) To adjust the front/back volume distribution (fader), Press the press the AUDIO button 5. "BASS" appears in the display. press the AUDIO button 5. Adjusting the treble Press the AUDIO button 5. "BASS" appears in the display. Press the button 7 repeatedly until "FADER" appears in the display. Press the Press the button 7 repeatedly until "TREB" appears in the display. or button 7 to adjust the fader (front/back). When you have finished making your changes, Press the or button 7 to adjust the treble. When you have finished making your changes, press the AUDIO button 5. press the AUDIO button 5. 57 SOUND Equalizer presets This device is equipped with an equalizer that has been preset with settings for the "ROCK", "POP" and "CLASSIC" music styles. [. . . ]