User manual BLAUPUNKT LAS VEGAS CD32

[. . . ] 10 Selecting the frequency band / memory bank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Setting the sensitivity of station seek tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Storing stations automatically (Travelstore) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 5 NOTES AND ACCESSORIES Thank you for deciding to use a Blaupunkt product. [. . . ] Mute while telephoning If your unit is connected to a mobile telephone, the car radio's volume will be muted as soon as you "pick up" the telephone. This requires to the mobile telephone be connected to the car radio as described in the installation instructions. The volume will be reduced to the configured mute volume level. Press the MENU button 5. Keep pressing the or button 5 until "ON VOL" appears in the display. Set the power-on volume using the and buttons 5. To help you adjusting the volume more easily, the volume will be increased / decreased as you make your changes. When you have finished making your changes, press the MENU button 5 twice. Instantaneously reducing the volume (mute) You can instantaneously reduce the volume (mute) to a level preset by you. Briefly press button 2. "MUTE" appears in the display. 9 RADIO MODE Radio mode Switching to radio mode If you are in CD or CD changer mode (CD changer only with the Las Vegas CD32), Setting the sensitivity of station seek tuning You can choose whether to tune only to strong reception stations or to also tune to those with a weak reception. keep pressing the SOURCE 6 button until the radio mode appears in the display together with the memory bank and frequency. Press the MENU button 5. Keep pressing the or button 5 until "SENS HI" or "SENS LO" appears in the display "SENS HI" means that the tuner is set high to sensitivity. If "SENS LO" is selected, "LOC" lights up in the display. Selecting the frequency band / memory bank This unit can receive programs broadcast over the FM and AM frequency band. There are three preset memory bank for the FM range and one for the AM range. Selecting the FM memory bank To switch between the FM memory bank FM1, FM2 and FMT, press the BAND/TS button :. Selecting the AM waveband To select the AM waveband, keep pressing the BAND/TS button : until AM appears in the display. Set the required sensitivity using the and buttons 5. Tuning into stations manually You can also tune into stations manually. Press the or button 5. Storing station presets Storing stations manually Tuning into a station There are various ways of tuning to a station. Automatic seek tuning Select the required memory bank (FM1, FM2 or FMT) or the AM waveband. Press the or button 5. Tune into the station. Press one of the station buttons 1-6 9 for longer than one second to store the station in that preset memory. The unit tunes to the next receivable station. 10 RADIO MODE Storing stations automatically (Travelstore) You can automatically store the six stations with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency band. Note: Any stations that were previously stored on this memory bank are deleted in the process. CD MODE You can use this unit to play standard CDs with a diameter of 5 inches. CD singles with a diameter of 3 inches and contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS CD mode Press and hold the BAND/TS button : until seek tuning begins. Deactivating REPEAT If you want to deactivate the repeat function, press button 3 (RPT) 9 again. Normal playback is then resumed. Scanning tracks (SCAN) You can play briefly all the tracks on the CD. Press button 2 (SCAN) 9. 12 CD MODE Pausing playback (PAUSE) Press button 1 9. "S--PAUSE" appears in the display. Playback is resumed. CD CHANGER MODE You can connect a CD changer to the Las Vegas CD32 unit. [. . . ] To deactivate X-BASS, keep the EQ/X-BASS button 8 pressed until "XBASS OFF" appears in the display. "X-BASS" disappears. SPECIFICATIONS Specifications Amplifier Output power: Las Vegas CD32: 4 x 22 watts sine in accordance with DIN 45 324 at 14. 4 V 4 x 50 watts max. power 4 x 15 watts sine in accordance with DIN 45 324 at 14. 4 V 4 x 40 watts max. power 4 x 18 watts sine in accordance with DIN 45 324 at 14. 4 V 4 x 45 watts max. [. . . ]