User manual BLAUPUNKT LAGUNA CD43

[. . . ] If you want to install your car radio yourself, please read the installation and connection instructions that follow these operating instructions. As a way of protecting your equipment against theft, the unit is equipped with a detachable control panel (release panel). Protect your equipment against theft by taking the control panel with you every time you leave your vehicle. Do not leave the control panel in your vehicle not even in a hidden place. [. . . ] For instance, after storing a radio station to a station button you will hear a confirmation beep. "OFF" means beep off, "ON" means the beep is switched on. If you are listening to CD, CD changer or AUX mode, press the BND· In order to guarantee the perfect functioning of the radio element, the unit must be set for the region in which you are located. You can choose between Europe (EUROPE), America (USA), Thailand (THAI) and South America (S-AMERICA). The tuner comes from the factory set for the region in which the unit was sold. Should you encounter problems with radio reception, please check this setting. Press and hold down the 1 and 5 buttons ; at the same time and switch on the device again with button 1. Press the buttons 8 within the next 8 seconds and select your tuner region. To save the setting, switch the device off and on again or wait approx. Tuning into stations manually You can also tune into stations manually. This unit can receive programmes broadcast over the FM and AM frequency ranges. If there is no CD inserted in the drive and the unit is playing Radio, CD Changer or AUX mode, gently insert CD with the printed side uppermost into the drive until you feel some resistance. Press the DIS button : for longer than two seconds until the required display appears. The next track will then be played for scantime as set in the "Setting the scantime". For further details, please read the section entitled "Setting the scantime" in the "Radio mode" chapter. stopping SCAN and continuing playback To stop scanning , press the MENU button 7. Remove the CD Notes: An ejected CD will be reloaded into the unit if not removed within 10 seconds to protect it from accidental damage. You may also eject a CD when the unit is off, or when CD is not playing. "RPT TRCK" appears briefly in the display and the RPT symbol lights up. Cancelling repeat If you want to stop the repeat function, press button 4 RPT ; again. Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer. 5 options are available: Track number and play time Track number and clock CD number and track number CD number and clock CD number and play time Press the DIS button : once or several times for longer than two seconds until the required display appears. [. . . ] When you have finished making your changes, press the AUDIO button 6. When you have finished making your changes, press the AUDIO button 6. When you have finished making your changes, press the AUDIO button 6. Three means that the X-Bass boost is set to maximum and OFF means that X-Bass is switched off. [. . . ]