User manual BLAUPUNKT KIEL CD35

[. . . ] Radio / CD Kiel CD35 Malaga CD35 7 645 050 510 7 645 060 510 Operating instructions http://www. blaupunkt. com 2 1 3 4 5 6 11 10 9 8 7 2 CONTROLS 1 Button to switch the device on/ off and operate the volume mute function. button SRC Short press: Switch sources between CD, CD changer (if connected) and AUX. Volume control CD compartment TRAF RDS button Short press: Switch traffic-information standby on/off. Keys 1 - 6 ; BND·TS button Short press: Select the FM memory banks and the MW and LW wavebands (MW/LW only on the Malaga CD35). [. . . ] You can set the scanning time in the menu to between 5 and 30 seconds (in steps of 5 seconds). Starting SCAN Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS You can use the PTY function to select stations of a particular programme type. Press and hold down the MENU button 8 for longer than two seconds. "SCAN" appears briefly in the display followed by a flashing display of the current station name or frequency. 32 RADIO MODE PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Note: If the tuner does not find a station that matches the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CDchanger mode to the station whose programme type matches the one you selected. Switching PTY on/off Selecting the PTY language You can select the language in which the programme types are displayed. The following are available: "DEUTSCH", "ENGLISH" and "FRANÇAIS". DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Press the MENU button 8. Press the or button 7 repeatedly until "PTY LANG" appears in the display. Set your preferred language using buttons 7. the When you have finished adjusting the setting, press the MENU button 8 twice. Selecting a programme type and starting seek tuning Press the or button 7. The current programme type appears in the display. If you want to select another programme type, you can do so by pressing the or button 7 whilst this display is visible. The radio will then tune into the next station it finds that matches your selected programme type. Press the MENU button 8. Press the or button 7 repeatedly until "PTY ON" or "PTY OFF" appears in the display. Press the or button 7 to switch PTY ON or OFF. Press the Press the MENU button 8. 33 RADIO MODE Optimising radio reception HICUT The HICUT function improves reception during poor radio reception (only FM). Press the or button 7 repeatedly until "TUN DISP" appears in the display. Press the or button 7 to switch between "CLOCK" and "FREQUENCY". Press the MENU button 8. Press the or button 7 repeatedly until "HICUT" appears in the display. "HICUT 0" means that the interference level will not be cut automatically. "HICUT 1" means that it will be cut automatically. Press the MENU button 8 twice. Press the Press the MENU button 8. Configuring the display In radio mode you have the option of displaying the waveband together with the memory bank / memory location and the time or the station name / frequency of the current station. Select "FREQUENCY" to display the station name / frequency or select "CLOCK" to display the waveband together with the memory bank / memory location and the clock time. 34 TRAFFIC INFORMATION Your device is equipped with an RDSEON receiver. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme you were listening to before. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Traffic information if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Setting the volume for traffic announcements Press the MENU button 8. Press the or button 7 repeatedly until "TA VOLUME" appears in the display. Switching traffic information priority on/off Briefly press the TRAF button 6. Traffic announcement priority is active when the traffic-jam symbol lights up in the display. [. . . ] If you select one of the presets, it is shown continuously in the display. When you have finished adjusting the setting, Press the press the AUDIO button 9. Press the button 7 repeatedly until "FADER" appears in the display. or button 7 to adjust the fader (front/rear). When you have finished adjusting the setting, Press the press the AUDIO button 9. 42 X-BASS X-BASS You can use the X-Bass feature to boost the bass at low volume levels. The selected X-Bass setting affects all the audio sources (radio, CD, CD changer or AUX). [. . . ]