User manual BLAUPUNKT JOHN DEERE MP36

[. . . ] 34 Switching the confirmation beep on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Mute while telephoning (Freiburg CD34) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Repeating individual tracks or whole CDs (REPEAT) . . . . . . . . . . . . . . . . . . . . 45 Scanning all tracks on all CDs (SCAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note: You can use the volume control 4 to adjust the volume of a telephone call whilst the call is being outputted by the sound system. RADIO MODE This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands, briefly press the BND·TS button 3. 36 Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Note: The RDS function must be activated before you can use this feature. Press the or button 8 to switch to the next station on the broadcasting network. Note: When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function. RADIO MODE DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Setting the sensitivity of station seek tuning You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. Storing stations automatically (Travelstore) You can automatically store the six stations providing the best reception in the region (only FM). Note: Any stations that were previously stored in this memory bank are deleted in the process. Press the MENU button 9. Press the or button 8 repeatedly until "SENS" appears in the display. Press the button 8. Press and hold down the BND·TS button 3 for longer than two seconds. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank. The display shows the currently set sensitivity level. "SENS HI6" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity setting. Set the sensitivity level that you buttons 8. Press the or button 8 to switch between "CLOCK" and "FREQUENCY". Select "FREQUENCY" if you want to display the station name / frequency. If you want to select another programme type, you can do so by pressing the or button 8 whilst this display is visible. The selected programme type appears briefly in the display. Press the or button 8 to start seek tuning. The radio will then tune into the next station that it finds that corresponds to your selected programme type. Press the MENU button 9 twice. 39 TRAFFIC INFORMATION Traffic information Your device is equipped with an RDSEON receiver. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme that you were listening to before. If you hear the warning sound, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Setting the volume for traffic announcements Press the MENU button 9. Press the or button 8 repeatedly until "TA VOLUME" appears in the display. Adjust the volume using the buttons 8. When you have finished making your changes, Switching traffic information priority on/off Briefly press the TRAF button 5. Traffic announcement priority is active when a traffic-jam symbol lights up in the display. Note: You will hear a warning sound: if you leave the reception area of a traffic information station that you are currently listening to. if, while listening to a CD or CD in the changer, you leave the reception area of a traffic information station that the system is tuned into, and the subsequent automatic search cannot find a new traffic information station. [. . . ] The volume distribution settings (balance and fader) apply to all the audio sources. Note: You can only adjust the sound settings for traffic announcements whilst a traffic announcement is actually being played. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Sound Setting the left/right volume distribution (balance) To adjust the left/right volume distribution (balance), press the AUDIO button 6. "BASS" appears in the display. Press the Press the button 8 repeatedly until "BAL" appears in the display. Adjusting the bass Press the AUDIO button 6. "BASS" appears in the display. When you have finished making your changes, or button 8 to adjust the balance (right/left). When you have finished making your changes, press the AUDIO button 6. [. . . ]