User manual BLAUPUNKT IVMS-7001

[. . . ] 15 Lay the cable through the headrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Insert the mounting frame in the headrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] As you do this, lift one piece of the filling material, and ensure that the cut is being made to an even depth. To remove other pieces, use a Dremel saw or another suitable tool. 15 DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO Open the headrest and remove filling and other items Carefully lift the covering material FRANÇAIS ENGLISH FITTING/REMOVAL Insert the monitor to check that it will fit into the cut area, and make adjustments if necessary. Insert the mounting frame in the headrest Before connecting the monitor, pass the connecting cables through the holes provided in the mounting plate, as shown in the illustration. Insert the mounting plate into the area that has been cut out, and fix it in place with appropriate fastenings. Lay the cable through the headrest Now pass the supplied cables through the opening so that they emerge from the underneath of the headrest. Now connect the power supply, ground and video signal cables, to check that the monitor is working. Inserting the monitor Before connecting the monitor, pass the connecting cables through the holes provided in the mounting plate, as shown in the illustration. Insert the monitor into the mounting plate, and attach it with appropriate fastenings. Monitor Mounting plate 16 FITTING/REMOVAL To remove the screen, insert the extraction tool between the screen and the mounting plate. Insert the extraction tool at the place where a slot has been provided between the screen and the mounting plate. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Check and adjust the monitor then apply the Velcro strips Connect the monitor, place it temporarily in the cut-out, and place the headrest into position. Check the various monitor settings such as brightness, headphone function, volume control and so on. Then attach the Velcro strips to the rear of the monitor, and push the frame onto the headrest. Take care not to press the screen itself, and apply pressure only in the region of the frame. Removal Extraction tool 17 FUNCTION OSD functions Main menu Call up the main menu by pressing the "MODE" key on the main device, or "MENU" on the remote control unit. Select the "EXIT" option to leave the OSD menu again. Sub-menu To reach the following menu options, select "MISC" from the main menu. [. . . ] You can find out which address is closest to you by contacting the telephone hotline listed on the back page of this booklet. Blaupunkt retains the right to rectify defects or supply a replacement. Visible screen area: 155. 52 (W) x 87. 75 (H) mm Angle of view: 5. 6": 7": from left and right: 45°, from above: 10°, from below: 30° from left and right: 60°, from above: 60°, from below: 30° Full monitor dimensions: 5. 6": 140 (W) x 114 (H) x 42 (D) mm 7": 200 (W) x 127 (H) x 33, 5 (D) mm Monitor weight: < 500 g Subject to changes! [. . . ]