User manual BLAUPUNKT IVDP-01

[. . . ] In Car Video IVDP-01 Operating and installation instructions http://www. blaupunkt. com TABLE OF CONTENTS Safety instructions . . . . . . . . . . . . . . . . . 53 DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Initial setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 35 SAFETY INSTRUCTIONS Thank you for deciding to use a Blaupunkt product. Please read these operating instructions before using the equipment for the first time. [. . . ] Pull off the front cover towards the front of the unit by pressing down on the release zone. Put the front cover in the supplied case for safe keeping as soon as you have removed it. 43 REMOVABLE FRONT COVER Protective case 2. Note that if the front cover is inserted incorrectly, the operating controls may not function correctly, and that parts of the LCD display may not appear. Press the OPEN button, and reinsert the front cover. Front cover Notes on safe handling 1. When removing or re-inserting the front cover, do not exert any pressure on the display or on the operating knobs. Avoid touching the contacts on the front cover or on the main housing, as this can interfere with their electrical conductivity. Use a clean, dry cloth to remove dirt or other foreign objects that might adhere to the contacts. Never expose the front cover to high temperatures or to direct sunshine. Make sure that the surface does not come into contact with volatile substances (such as petroleum, thinner or insecticide). ENTER Button for confirming sections / chapters selected using the number or cursor buttons in combination with the screen. AUDIO Selection of the audio soundtrack on DVDs with multilingual audio functions. ANGLE Selection of the camera perspective on DVDs with multi-angle function. MENU Display a DVD's main menu. Preparing the remote control unit for use Insert the batteries 1. Make sure that the positive and negative poles of the battery are positioned as shown inside the battery compartment. Using the remote control Point the remote control unit at the infra-red sensor on the front of the player (the receiver for the remote control unit). Working angle: up to about 30° in any direction from the front of the IR sensor. Note: Make sure that the connections are made in accordance with the circuit diagram (Page 46) to avoid damaging the equipment. < = > ? @ A Note: / , DISPLAY and ANGLE The keys may also be assigned to special functions (see "Special functions"). 47 MAIN FUNCTIONS 22 23 24 21 IR ON 25 26 27 28 Inserting a DVD/VCD/CD 1. Wait until the cover has completely opened, then press the button L to eject the disc. Remove the disc and close the front cover. MAIN FUNCTIONS - If the STOP button is pressed for a short time, play will be stopped, and if the PLAY button is pressed, replay will start again. - If you press the STOP button twice, the player will stop and return to the first section / chapter. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Stop play Note: The and buttons may not be active for some VCD 2. 0 discs (PBC playback). Choosing the AV signal You assign the AV output signal to the external AV input cable or the DVD player with this button. Fast forward / fast reverse Press the FF and REW buttons during play. Each time these buttons are pressed, the speed with which the player is moving forwards or backwards will alter, depending on the type of disc, as follows: DVD Normal Replay Pause (still picture) Press the button during play. Press the button again to return to normal play. Repeat Press the REPEAT button to select the repeat mode, as shown here: REPEAT 1 REPEAT REPEAT OFF 2x 4x 6x 8x DVD/CD VCD & CD Normal Replay 1x 1. [. . . ] a) General setup On this general setup page you will find all the menu items for the video and audio output. b) Loudspeaker setup You can activate the audio output from the DOLBY AC3 5. 1 DOWNMIX for 2-channel mode here. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. All rights reserved. 55 GENERAL SETUP General setup TV DISPLAY setup You can choose the appropriate picture format here (4:3 or 16:9) according to the picture format of the connected TV. [. . . ]