User manual BLAUPUNKT HONOLULU CD50

[. . . ] Radio / CD Honolulu CD50 Operating instructions 1 2 3 4 16 15 5 6 14 7 13 12 11 10 8 9 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH OPERATING ELEMENTS 1 2 3 4 5 6 7 8 9 : ; < = button to unlock release panel Volume control ON button, switches the unit on/off, mute FM button, selects the FM memory bank AM button, selects the AM waveband Display button, displays the time DIS, changes display contents MENU button, accesses the menu for basic settings button, opens the flip release panel Cursor button block OK button, confirms menu selections and starts the SCAN function EQ button, adjusts the BASS CENTER frequency AUD button, adjusts bass, treble, balance and fader LD, switches the Loudness function on/off 1 to 6 station buttons TS button, starts the Travelstore function CD·C button, switches sound source between radio, CD and CD changer (if connected) > ?@ 4 CONTENTS Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Important information . . . . . . . . . . . . . . 7 Playing tracks in random order (MIX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This means that the tuner can be configured to suit requirements that are specific to various countries. The tuner will only function optimally if it is configured for the country/region in which the unit is being operated. 12 CD PLAYER OPERATION The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm. CD singles with a diameter of 8 cm and contour CDs (shape CDs) are not suitable for use with this CD player. We assume no liability for any damage done to the CD player resulting from the use of unsuitable CDs. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS CD player operation Selecting tracks Press a key on the cursor block : to select the next or the previous track. Press or : once to restart the same track. Audible fast forward/reverse (CUE/REVIEW) To start Cue or Review, press and hold down either : until the process begins. or Starting CD player operation q If there is no CD in the player, press 9. The flip release panel will open. Playing tracks in random order (MIX) Press 5 MIX >. "MIX CD" will appear briefly in the display, the MIX symbol will light up in the display. Stopping the MIX function Insert a CD into the player with the label facing up until you feel resistance. Do not attempt to assist or prevent this process. Press 5 MIX > again. "MIX OFF" will appear briefly in the display and the MIX symbol will no longer light up. Press the operating panel closed gently until you feel it click into place. q If there already is a CD inserted into the player, Scanning tracks (SCAN) You can scan all of the tracks on the CD. Press OK ; for longer than two seconds. For more information, read the section on "Adjusting the scan time" in the chapter on "Radio Operation". 13 press CD·C @ repeatedly until "CD" appears in the display. Playback will resume at the point where it was interrupted. CD PLAYER OPERATION Stopping the SCAN function, continue listening to the current track CD CHANGER OPERATION CD changer operation Note: For information on how to handle CDs, how to insert CDs into the changer and how to operate the changer, please refer to the instructions included with the CD changer. To stop the SCAN function, press OK ;. The track currently scanned will continue playing. Repeating individual tracks (REPEAT) To repeat the track currently playing, press 4 RPT >. "REPEAT TRCK" will appear briefly in the display, the RPT symbol will light up in the display. Stopping the REPEAT function Starting CD changer operation Press CD·C @ repeatedly until "CHANGER" appears in the display. Playback will begin with the first CD the changer detects in the magazine. Selecting CDs To select a CD up or down in the magazine, press or : the required number of times. If you want to stop the REPEAT function, press 4 RPT > again. "REPEAT OFF" will appear briefly in the display and the RPT symbol will no longer light up. CD playback will resume normally. Selecting tracks To select a different track on the CD currently playing, press or : the required number of times. Interrupting playback (PAUSE) Press 3 >. "PAUSE" will appear in the display. Stopping PAUSE Audible fast forward/reverse (CUE/REVIEW) To start Cue or Review, press and hold down either : until the process begins. or Press 3 > during the pause. Playback will resume. Switching the display mode To switch the display between the track number and time or the track number and elapsed playing time, press / DIS 7 for longer than two seconds once or repeatedly as required. 14 Switching the display mode To switch the display between the track number and time or the track number and elapsed playing time or the CD number and track / DIS 7 for longnumber, press er than two seconds once or repeatedly as required. CD CHANGER OPERATION To stop the MIX function, press 5 MIX > repeatedly until "MIX OFF" appears briefly in the display and MIX no longer lights up. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Repeating individual tracks or entire CDs (REPEAT) To repeat the track currently playing, press 4 RPT > briefly. "REPEAT TRCK" will appear briefly in the display, RPT will light up in the display. Stopping the MIX function To repeat the entire CD currently playing, press 4 RPT > again. "REPEAT DISC" will appear briefly in the display, RPT will light up in the display. [. . . ] - The cross sections of the positive and negative cables must not be less than 1. 5 mm2. - Incorrect installation may cause interference with electronic vehicle systems or your car radio. - You can obtain the adapter cable required for your vehicle type from any BLAUPUNKT dealer. E Normas de seguridad F Consignes de sécurité Respecter les consignes de sécurité suivantes pendant la durée du montage et du branchement. Respecter les consignes de sécurité du constructeur automobile ! [. . . ]