User manual BLAUPUNKT HEIDELBERG CD50 U

[. . . ] 10 Playing tracks in random order (MIX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Repeating individual tracks (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Audible fast forward/reverse (CUE/REVIEW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Repeating individual tracks or entire CDs (REPEAT) . . . . . . . . . . . . . . . . . . . . [. . . ] 10 RADIO OPERATION You can tune into radio stations in a number of different ways. Automatic seek tuning ENGLISH Tuning int o radio st ations Press MENU 8. Press : repeatedly until "SENS" appears in the display. Press :. FRANÇAIS PORTUGUÊS ESPAÑOL Press or :. The radio will tune into the next available station within reception range. Manual station selection You can also tune into radio stations manually. The currently selected setting will appear in the display. "SENS HI" indicates the highest level of sensitivity, "SENS LO" the lowest. If you select "SENS LO", "lo" will light up in the display. Press sensitivity. : to select the desired Press or :. Once you have made your selection, press MENU 8 or OK ;. Note: You cannot use manual tuning unless the RDS function is deactivated. Paging through the broadcasting network (for FM only) If a radio broadcasting network has more than one station, you can page through the "station network". Storing radio st ations Storing radio stations manually Select the desired FM memory bank FM1, FM2, FMT or the AM waveband. Tune the radio into the desired station. Press or : to tune into the next station in the network. Press and hold down one of the station preset buttons 1 to 6 > on which you want to store the radio station for longer than two seconds. Note: To take advantage of this function, you must have activated the RDS function. Stopping the SCAN function, continuing to listen to the radio station scanned Press MENU 8. Press : repeatedly until "HICUT" appears in the display. Press or : to switch HICUT on or off. "HICUT 0" indicates that the function is switched off; when "HICUT 3" appears, the treble will be automatically cut as far as possible. Press OK ;. SCAN will end and the last station scanned will continue playing. Press MENU 8 or OK ;. 12 RADIO OPERATION Interference-dependent bandwidth switching (SHARX) The SHARX function allows you to virtually eliminate interference from neighbouring radio stations. When you are in a reception area with a large number of radio station signals, switch the SHARX function on. "REPEAT OFF" will appear briefly in the display, the RPT symbol will no longer light up. Press : to select "CD NAME". Press or : twice. Interrupt ing playback ( PAUSE) Press 3 >. "PAUSE" will appear in the display. If the CD you selected does not yet have a name, eight dashes will appear in the display. The first input position will flash. If you want to leave this position blank, select the dash. Press 3 > during the pause. Playback will resume. Press or : to move the cursor to a different input position. the name. Swit ching t he display mode To switch the display between the track number and time or the track number and elapsed playing time or track number and CD name, Press MENU 8 or OK ; to store 15 CD PLAYER OPERATION Deleting a CD name CD CHANGER OPERATION CD changer operation Note: For information on how to handle CDs, how to insert CDs into the changer and how to operate the changer, please refer to the instructions included with the CD changer. You are listening to a CD and would like to delete its name. Press MENU 8. Press and hold down MENU 8. After four seconds you will hear a beep and "DELETE NAME" will appear in the display. Starting CD changer operat ion Press CD·C @ repeatedly until "CHANGER" appears in the display. Playback will begin with the first CD the changer detects in the magazine. Release MENU 8. The CD name will be deleted. Press OK ; to return to the menu. The flip release panel will fold down, the CD will eject. Select ing CDs To select a CD up or down in the magazine, press or : the required number of times. Select ing t racks To select a different track on the CD currently playing, press or : the required number of times. Remove the CD and close the operating panel. Audible fast forward/reverse (CUE/REVIEW) To start Cue or Review, press and hold down either : until the process begins. or Swit ching t he display mode To switch the display between the track number and elapsed playing time or the track number and time, or track number and CD number or track number and CD name, press / DIS 7 for longer than two 16 CD CHANGER OPERATION ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS seconds once or repeatedly as required, until the desired information appears in the display. Repeating individual t racks or entire CDs ( REPEAT) To repeat the track currently playing, press 4 RPT > briefly. "REPEAT TRCK" will appear briefly in the display, RPT will light up in the display. changer in random order. The other CD changers first play all of the tracks on a CD in random order and then select the next CD in the changer. Stopping the MIX function To stop the MIX function, press 5 MIX > repeatedly until "MIX OFF" appears briefly in the display and MIX no longer lights up. To repeat the entire CD currently playing, press 4 RPT > again. [. . . ] "BASS" will appear in the display. Press Press : until "FADER" appears in the display. or : to alter the fader. 20 TONE AND BALANCE/FADER Switching Loudness on/off Loudness boosts the bass and treble when the volume is low to create a more natural sound. EQUALIZER Equalizer This car audio system is equipped with a parametric digital equalizer. In this case, parametric means that it is possible to individually raise or lower one frequency (GAIN +10 to -20 dB) for each of the five filters. The following filters are available: SUB LOW EQ 32 to 50 Hz LOW EQ 63 to 250 Hz MID EQ 315 to 1250 Hz MID/HIGH EQ 1600 to 6300 Hz HIGH EQ 8000 to 12500 Hz These filters can be adjusted without the use of measuring equipment. [. . . ]