User manual BLAUPUNKT FRANKFURT C70

[. . . ] Radio / Cassette Frankfurt C70 Operating instructions Bitte aufklappen Open here Ouvrir s. v. p. Öppna Por favor, abrir Favor abrir 2 CONTROLS DEUTSCH 1 2 3 4 5 6 7 8 9 : ; < = > 39 PORTUGUÊS ESPAÑOL SVENSKA button - opens the operating panel Button - switches the radio and mute function on/off Volume control Soft keys - the function of the soft keys depends on the current content of the display OK button - confirms menu entries and leaves the menu TIM button - selects the TIM function Multifunction rocker switch MENU button - selects the menu for basic settings AUD button - adjusts bass and treble, balance and fader as well as loudness DIS button - changes display contents Display CC button, to start cassette play CDC button - starts CD changer playback (only if connected) or plays an external audio source (only if connected) TUNE button - activates radio mode Selects the radio function menu (only possible in radio mode) NEDERLANDS ITALIANO FRANÇAIS ENGLISH TABLE OF CONTENTS Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Scanning all tracks on a cassette (SCAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using your car radio for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the soft key 4 with the display allocation "TUN". Press the soft key 4 with the display allocation "HCUT". Press the OK button 5 to return to the Press the or button 7 repeatedly until the desired HICUT reduction appears on the display. "HICUT 3" denotes the largest automatic treble and interference-level reduction. previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored. Press the OK button 5 to return to the 54 RADIO MODE Interference-related wavelength change (SHARX) With the SHARX function you can eliminate interference from neighbouring stations almost completely. Switching SHARX on/off To switch SHARX on/off, allocation "MONO". The current status "MONO" or "STEREO" appears briefly on the display. When mono is activated, an arrow symbol lights up alongside "MONO". DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Press the soft key 4 with the display Press the TUNE button > or wait 8 seconds. The settings are now stored. press the MENU button 8; press the soft key 4 with the display allocation "TUN"; Changing the display You can select the content of the display. In the top display line (lead line) you can switch between the station name, frequency, programme type and time. In the bottom display line (DOT field) you can switch between the time and the memory level. press the soft key 4 with the display allocation "SHRX". The current status, "SHARX ON" or "NO SHARX", appears briefly on the display. When SHARX is activated, an arrow symbol lights up on the display alongside "SHRX". Press the DIS button : repeatedly until the desired information - station name, frequency, programme type or time - appears in the lead line. Press the OK button 5 to return to the previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored. Selecting radio text display Some radio stations use the RDS signal to broadcast "main texts", so-called radio texts. You can allow or block the display of radio text. Switching between stereo and mono When radio reception is poor, you can select the mono radio mode. The transition from stereo to mono is gradual and the car radio will revert to the stereo mode when switched on once again. Press the TUNE button > when in radio mode. The radio function menu appears on the display. Press the TUNE button > when in radio mode. The radio function menu appears on the display. Press the soft key 4 with the display allocation "NEXT". The "second page" of the radio function menu appears on the display. Press the soft key 4 with the display allocation "NEXT". The "second page" of the radio function menu appears on the display. Press the soft key 4 with the display allocation "RTXT". Press the TUNE button > or wait 8 seconds. The settings are now stored. 55 RADIO MODE Naming a station You have the option of giving a preset station a four-digit name to appear on the display. Select the station name you would like to clear by pressing the soft key 4 with the display allocation "PREV" or "NEXT" for the previous or next preset station on that memory level. Press the MENU button 8. Press the soft key 4 with the display allocation "TUN". Press the soft key 4 with the display allocation "CLR". Resetting station names to RDS names Press the soft key 4 with the display allocation "NAME". [. . . ] -4 dB ENGLISH TMC PRE-AMPLIFIERS TMC for dynamic navigation systems TMC denotes "Traffic Message Channel". Traffic announcements are transmitted digitally via TMC and can therefore by used by suitable navigation systems for route planning. Your car radio has one TMC output for connection to Blaupunkt navigation systems. Your Blaupunkt dealer will tell you which navigation systems can be used with your car radio. When a navigation system is connected and a TMC station received, "TMC" lights up on the display. Pre-amplifiers External pre-amplifiers and a subwoofer can be connected via the appropriate lines of your car radio. [. . . ]