User manual BLAUPUNKT ESSEN MP35

[. . . ] Radio / CD / MP3 Brighton MP35 Essen MP35 7 645 160 510 7 645 150 510 Operating instructions http://www. blaupunkt. com 2 1 3 4 5 6 11 10 9 8 7 2 CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 Button to switch the device on/ off and operate the volume mute function. button SRC Short press: Switch sources between CD/MP3, CD changer (if connected) and AUX. Volume control CD compartment TRAF RDS button Short press: Switch traffic-information standby on/off. Keys 1 - 6 ; BND·TS button Short press: Select the FM memory banks and the MW and LW wavebands (MW/LW only on the Brighton MP35). [. . . ] When you have finished adjusting the setting, press the MENU button 8 twice. Notes: You can use the volume control 4 to adjust the volume during a traffic announcement for the duration of that announcement. For further details, please read the "Sound" chapter. 40 CD MODE You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. We do not accept responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. For further details, please read the "MP3 mode" chapter. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH CD mode Note: If the vehicle ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD. If there is already a CD inserted in the drive, press the SRC button 2 repeatedly until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Selecting tracks Press one of the arrow buttons 7 to select the next or previous track. If you press the or button 7 once, the current track will be played again from the beginning. Fast track selection For fast track selection (backwards or forwards), press and hold down one of the / buttons 7 until fast-reverse / fast-forward track selection begins. Switching to CD mode If there is no CD inserted in the drive, Gently push the CD with its printed side uppermost into the drive 5 until you feel some resistance. The CD starts playing. Fast searching (audible) For fast searching (backwards or forwards), press and hold down one of the buttons 7 until fast searching backwards / forwards begins. 41 CD MODE Random track play (MIX) Press the 5 MIX button :. "MIX CD" appears briefly in the display and the MIX symbol lights up. Cancelling MIX track is repeated continuously until you deactivate RPT. Cancelling REPEAT If you want to cancel the repeat function, press the 4 RPT button : again. "RPT OFF" appears briefly in the display and the RPT symbol disappears. Normal playback is then resumed. Press the 5 MIX button : again. "MIX OFF" appears briefly in the display and the MIX symbol disappears. Scanning tracks (SCAN) You can scan (briefly play) all the tracks on the CD. Pausing playback (PAUSE) Press button 3 :. "PAUSE" appears in the display. Playback is resumed. Press and hold down the MENU button 8 for longer than two seconds. For further details, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter. Cancelling SCAN and continuing listening to a track Press button 3 Configuring the display You can choose between two display types for CD mode: Track number and clock time Track number and playing time Press the MENU button 8. Press the or button 7 repeatedly until "CD DISP" appears in the display. or button 7 to switch between "PLAY TIME" and "CLOCK". To cancel scanning, press the MENU button 8. The currently scanned track will then continue to be played normally. Press the Repeating tracks (REPEAT) If you want to repeat a track, Press the MENU button 8 twice. press the 4 RPT button :. "RPT TRCK" appears briefly in the display and the RPT symbol lights up. You can allow the CD text to be displayed as scrolling text every time you switch to another track. The default display will appear again after the whole CD text has been shown once. [. . . ] To select an equalizer preset, X-BASS X-BASS You can use the X-Bass feature to boost the bass at low volume levels. The selected X-Bass setting affects all the audio sources (radio, CD/MP3, CD changer or AUX). Adjusting the X-BASS boost press the AUDIO button 9. "BASS" appears in the display. Press the button 7 repeatedly until "POP", "ROCK", "CLASSIC" or "EQ OFF" appears in the display. or button 7 to select one of the presets or select "EQ OFF" to switch off the equalizer. If you select one of the presets, it is shown continuously in the display. [. . . ]