User manual BLAUPUNKT ESSEN CD33

[. . . ] Radio / CD Essen CD33 Lausanne CD33 Madeira CD33 Operating instructions http://www. blaupunkt. com Open here 2 1 12 2 11 3 4 10 5 9 8 6 7 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 6 7 8 button to release the control panel. Long press: Button, to switch the unit on/off, Short press: To mute the unit's volume. Short press: SRC button, to select the CD, radio, CD changer or Compact Drive MP3 (if connected) and AUX sources. X-BASS button, to adjust the XBass function. 9 : ; < Short press: AUDIO button, to adjust the bass, treble, balance and fader settings. [. . . ] "SENS LO1" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, "lo" lights up in the display. Press the Set the required sensitivity using the and buttons 5. Press the MENU button 7. 33 RADIO MODE Storing stations Storing stations manually Scanning receivable stations (SCAN) You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN Hold down the MENU button 7 for longer than two seconds. "SCAN" appears briefly in the display followed by the current frequency (which flashes). Stopping SCAN and continuing listening to a station Briefly press the MENU button 7. Scanning is stopped and the station that was tuned into last will remain active. Select the required FM1 / FM2 / FMT memory bank or MW / LW waveband (MW and LW are not available on the Essen CD33). Tune into the station. Press one of the station buttons 1 6 : for longer than one second to store the station to that button. Storing stations automatically (Travelstore) You can automatically store the six stations with the strongest reception in the region (only for FM). Note: Stations that were previously stored in this memory bank are deleted in the process. Keep the BND·TS button < pressed for longer than two seconds. After the process is completed, the station stored in FMT memory location 1 will be played. 5 until "SCANTIME" appears in the display. When you have finished making your changes, press the MENU button 7 twice. Note: The set scantime also applies to scanning in CD and CD changer mode. Setting the scantime Press the MENU button 7. Keep pressing the or button Listening to stored stations Select the memory bank on which the station was stored. Press the station button of the station you want to listen to. 34 RADIO MODE Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK MUSIC Using the PTY function, you can directly select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Note: If no station is found that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. If the tuned radio station or another station on the broadcasting network broadcasts the required programme type at a later point in time, the radio automatically switches from the currently tuned station or from CD mode / CD changer / Compact Drive MP3 mode to the station whose programme type matches the one you selected. Press the MENU button 7. Keep pressing the or button 5 until "PTY ON" or "PTY OFF" appears in the display. When you have finished making your changes, press the MENU button 7. Selecting a programme type and starting seek tuning Press the or button 5. The current programme type appears in the display. gramme type, you can do so by pressing the or button 5 whilst in this display. Or Press one of the buttons 1 - 6 : to select a programme type that is stored on one of these buttons. The next station corresponding to your selected programme type will then be tuned into. Press the 35 DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS If you want to select another pro- ITALIANO FRANÇAIS ENGLISH DEUTSCH Programme type (PTY) Switching PTY on/off RADIO MODE Storing a programme type on a station button Switching hicut on/off Select a programme type using the or button 5. Press the MENU button 7. Keep pressing the or button 5 until "HICUT" appears in the display. [. . . ] When you have finished making your changes, or button 5 until "BAL" appears in the display. Press the or button 5 to adjust the balance (right/left). When you have finished making your changes, Press the press the AUDIO button 9. Adjusting the fader settings To adjust the front/back volume distribution (fader), press the AUDIO button 9. Adjusting the treble settings To adjust the TREBLE, press the AUDIO button 9. "BASS" appears in the display. press the AUDIO button 9. "BASS" appears in the display. Keep pressing the Keep pressing the or button 5 until "TREB" appears in the display. or button 5 until "FADER" appears in the display. or button 5 to adjust the treble. [. . . ]