User manual BLAUPUNKT ESSEN CD31

[. . . ] Radio / CD Alicante CD31 Essen CD31 Lausanne CD31 Operating instructions Bitte aufklappen Open here Ouvrir s. v. p. Öppna Por favor, abrir Favor abrir 2 1 2 14 13 3 12 4 5 11 10 6 9 7 8 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL OPERATING ELEMENTS DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 6 7 button to release the control panel. FMT button (Essen CD31) to select the FM memory levels, to switch to radio mode, to start the Travelstore function. BAND button (Alicante CD31 and Lausanne CD31), to select the FM memory levels and MW / LW frequency range, to switch to radio mode, TS, to start the Travelstore function. [. . . ] To do so, use either the Travelstore function or allow the automatic seek tuning feature to run once through the entire frequency range. After the process is completed, the station stored in FMT memory location 1 will be played. Press the Switching to preset stations Select the memory level on which the station was stored. Press the preset station button of the station you want to listen to. Scanning receivable stations (SCAN) You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN Storing stations Storing stations manually Select the required FM1 / FM2 / FMT memory or MW / LW frequency range (MW and LW are not available on the Essen CD31). Press the SCAN button 4. Scanning begins. "SCAN" appears briefly in the display followed by the current frequency (which flashes). Stopping SCAN and continuing listening to a station Tune into the station. Press one of the station buttons 1 5 ; for longer than one second to store the station to that button. Storing stations automatically (Travelstore) You can automatically store the five stations with the strongest reception in the region (only for FM). Note: Stations that were previously stored in this memory are deleted in the process. Press the SCAN button 4 again. Scanning is stopped and the station that was tuned into last will remain active. Keep the FMT or BAND (TS) button 2 pressed for longer than two seconds. Keep pressing the or button 9 until "SCANTIME" appears in the display. Note: If no station is found that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. If the tuned radio station or another station on the broadcasting network broadcasts the required programme type at a later point in time, the radio automatically switches from the currently tuned station or from CD mode / CD changer mode to the station whose programme type matches the one you selected. Set the required scantime using the and buttons 9. When you have finished making your changes, press the MENU button : twice. Note: The set scantime also applies to scanning in CD and CD changer mode. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK MUSIC Using the PTY function, you can directly select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Keep the TRAF (PTY) button < pressed until "PTY" appears in or disappears from the display. The programme type appears briefly in the display when you switch PTY on. Selecting a programme type and starting seek tuning The current programme type appears in the display. If you want to select another proPORTUGUÊS gramme type, you can do so by pressing the or button 9 whilst in this display. Or Press one of the buttons 1 - 5 ; to select a programme type that is stored on one of these buttons. 35 ESPAÑOL Press the or button 9. SVENSKA NEDERLANDS Switching PTY on/off ITALIANO FRANÇAIS ENGLISH DEUTSCH RADIO MODE The selected programme type is displayed briefly. The next station corresponding to your selected programme type will then be tuned into. Treble reduction feature during interference (HICUT) The HICUT function improves the sound when radio reception is poor (FM only). When interference is being experienced, the treble is automatically cut, which therefore also reduces the level of interference. Switching hicut on/off Press the Storing a programme type on a station button Select a programme type using the or button 9. Press the MENU button :. Keep pressing the or button 9 until "HICUT" appears in the display. "HICUT 0" means that treble will not be reduced, and "HICUT 1" means that treble will be reduced. Press and hold the required button 1 - 5 ; until you hear a beep. [. . . ] Selecting 12/24-hour clock mode Press the MENU button :. "MENU" appears in the display. Keep pressing the or button 9 until "24 H MODE" or "12 H MODE" appears in the display. 42 SOUND Sound Adjusting the bass settings To adjust the BASS, VOLUME DISTRIBUTION Adjusting the balance settings To adjust the left/right volume distribution (balance), DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Volume distribution press the AUDIO button 8. "BASS" appears in the display. When you have finished making your changes, press the AUDIO button 8. "BASS" appears in the display. Press the Keep pressing the Press the or button 9 until "BAL" appears in the display. press the AUDIO button 8. Adjusting the treble settings To adjust the TREBLE, or button 9 to adjust the balance (right/left). When you have finished making your changes, press the AUDIO button 8. "BASS" appears in the display. press the AUDIO button 8. [. . . ]