User manual BLAUPUNKT DVDME1

[. . . ] . 20 ­1­ SAFETY PRECAUTIONS CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN WARNING!To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent electrical shock, do not open the cabinet. The lightning flash with arrowhead symbol within and equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within and equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. To ensure the proper use of the unit, read this manual carefully and keep it for future reference. [. . . ] (Left Side) Slow (Right Side) 10 SetUp Menu 11 12 13 14 11 Direction Buttons TV/AV Select (For MV/TV) 24 Mute 25 Power 26 Remote Transmitter Channel ­, + (For MV/TV) 12 Play 13 Title ­8­ PREPARATIONS BEFORE OPERATION Connect to a Mobile Amplifier Turn off all the equipment before connections. Monitor External Remote Sensor Video In REMOTE IN VIDEO OUT R L AUDIO OUT DC 12V 1. 5A + 12V ­ Fuse Filter Audio In Mobile Amplifier In the connection diagram, the system's power leads should be connected at the same point to minimize noise. Connect to a TravelPilot DX-N Navigation System DX-N Main Unit (Rear View) DX-N Monitor Cable (supplied with DX-N) Turn off all the equipment before connections. s Video Converter 7 607 005 718 Pin 1: Pin 2: Pin 3: Pin 4: Pin 5: Pin 6: 12vdc Constant Ground Reverse Trigger 12vdc Output 12vdc Ignition Video Trigger (Plus=FBAS) 5 3 1 6 4 2 s Input Output Video In s 15 Pin Serial Cable (supplied with converter) RCA Cable Video Line Output s DVD-ME1 DX-N Screen This schematic describes the installation of an After Market video source, such as VCR, DVD, TV Tuner, or Video Game, connected to a Blaupunkt DX-N Navigation System through a Blaupunkt Video Converter, P/N 7 607 005 718. The Video Converter is necessary to convert the source's video signal into a usable format for the DX-N. Signal connections include: (a) RCA connection from the video source's output to the converter's input, (b) 15 pin serial connection between the converter' s output and the DX-N ROM 15 pin input, and (c) DX-N ROM connection to the DX-N screen, using the supplied video cable. Note: When using a gooseneck mounting adapter, P/N 7 612 001 204, the supplied cable will take the place of the DX-N monitor cable supplied with the DX-N package. Note: Video source audio connection can be made via RF modulator to any factory radio or via RCA cable through an After Market radio if an auxiliary input is available. ­9­ PREPARATIONS BEFORE OPERATION Connect to a TV/Monitor Turn off all the equipment before connections. External Remote Sensor REMOTE IN VIDEO OUT R L AUDIO OUT DC 12V 1. 5A AC Adaptor (to AC) TV/Monitor Set the unit. s If the system of the TV/monitor is NTSC, push SYSTEM and select NTSC. s If the system of the TV/monitor is AUTO (multi-system), push SYSTEM and select AUTO. Set the "TV Display" to "16:9 WIDE" in the function setting column. Set the "TV Display to "4:3/PS" or "4:3/LB" in the function setting column. Connect the output terminal of the AC adaptor to DC IN jack of this unit. If you want to enjoy the music by yourself, please connect the headphone (not supplied) to the jack on the front panel. Video In Audio In-R Audio In-L Connect to an Ordinary Home Amplifier Turn off all the equipment before connections. TV/Monitor Video In External Remote Sensor REMOTE IN VIDEO OUT R L AUDIO OUT DC 12V 1. 5A AC Adaptor (to AC) Audio In-L Audio In-R There is no sound output from the output terminal when a DTS disc is played. ­ 10 ­ BASIC OPERATIONS TV/Video Selection Press POWER on the TV and audio system. amplifier is different from another, please refer to the manual of the amplifier. (e. g. , connect the audio output of the DVD player to the DVD audio input of an amplifier. ) s Each TV/Video DVD/LD Note: this step can be cancelled if you are utilizing the auxiliary input of a Blaupunkt receiver. Play Discs DVD CD 1. Press to open the disc tray and load a disc with the label side up. Open/Close 3. Press (PLAY) to play the disc. AFTER STEP 4 IS FINISHED: s PLAY DVD The TV screen shows DVD menu or title menu. s PLAY CD Press (PLAY), the unit plays the disc according to the track numbers. 5. You have to push this button twice to stop playback of a DVD disc. DVD System Settings According to the system of the TV/monitor, set the system of the unit to make it match the TV/monitor. System 1. The screen shows: NTSC Pause DVD CD Pause WHEN PLAYING PICTURES If the pictures of DVD are played, press to make playback pause. Each time you press , the picture advances one frame. STEP WHEN PLAYING MUSIC CD Press to make playback pause. Press (PLAY) to resume playback. ­ 11 ­ BASIC OPERATIONS OSD (On-Screen Display) When the OSD is pressed, the TV/monitor screen shows the operation functions and information about the disc. DVD CD Press OSD to select: OSD OSD OFF Volume Control s s DVD CD Press VOLUME on the TV/monitor or amplifier to adjust the volume. Press or to skip the next or previous page, select with direction buttons. [. . . ] Fix the unit to the car through mounting holes. Cushion plate Note: Please remove the disc when the unit is not in use. ­ 19 ­ LIMITED WARRANTY INFORMATION (UNITED STATES ONLY) Robert Bosch Corporation warrants new Blaupunkt car audio and video products it distributes in the United States through authorized Blaupunkt dealers, or which are imported as original vehicle equipment by the automobile manufacturer, to be free from defects in material and workmanship, in accordance with the following: For twelve (12) months after delivery to you, the original consumer purchaser, we will repair or at our option replace at no charge to you any car audio and video product which, under normal conditions of use and service, proves to be defective in materials or workmanship. However, this warranty does not cover expenses incurred in the removal or reinstallation of any car audio and video product, whether or not proven defective, and does not cover products not purchased from an authorized Blaupunkt dealer. This warranty is limited to the original consumer purchaser and is not transferable. Repaired and replacement car audio and video products shall assume the identity of the original for purpose of this warranty and this warranty shall not be extended with respect to such products. [. . . ]