User manual BLAUPUNKT DAVOS RDM 169

[. . . ] 42 Scrolling through the broadcast networks (FM only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Switching between the memory banks (FM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Storing stations with the strongest reception automatically with Travelstore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Selecting the automatic tuning sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use <</>> to have the last selected programme type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1-6. The following list indicates some of the programme types which are currently available. POP ROCK WEATHER CHILDREN TRAVEL HOBBIES JAZZ OLDIES NEWS SPORT CULTURE Refer to "DSC programming ­ PTY Lang" to find information on switching the language used to display the programme types between German and English. After the beep the display will show the programme type offered by the station currently playing. If "NONE" appears in the display, the current station has no PTY code. Programme types Selecting a programme type a) Using the preset buttons When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory. · If you would like to listen to a station with this PTY, press / to start the seek tuning function. If the radio is unable to find a station offering the selected programme type, the display will show "NO PTY" and a beep will be emitted. The radio will select the station which was tuned into before seek tuning was activated. Please refer to the next section on "Storing programme types". PTY - Programme Type PTY is an RDS service offered by an increasing number of broadcasting stations. This feature allows you to select FM stations automatically according to their programme type. If you want to have the priority for traffic announcements activated while listening to one of these stations (e. g. If a traffic announcement is broadcast, the radio will automatically switch to the linked traffic programme station (in this case, NDR2) for the duration of the message and return to the original programme (NDR3) afterwards. Traffic announcement priority on/off If the priority for traffic announcement programmes is activated, "TA" will light up in the display. To switch the priority on or off: · Press the "AF. TA" button. If you press "AF. TA" while a message is being broadcast, this message only will be interrupted. Please note that several buttons have no function while a traffic announcement is broadcast. · or press a preset button which has a traffic programme station allocated to it. b) Switch off the priority for traffic announcements: · Press "TA". "TA" will disappear from the display. Automatic seek tuning start (CD mode) If you leave the reception area for the traffic programme station you have tuned into while you are listening to a CD, the system will automatically start searching for a new traffic programme. If no such station is found within approximately 30 seconds, a warning beep will sound every 30 seconds. To switch the warning beep off, proceed as described above. Warning beep If you leave the reception area of the traffic programme station currently tuned into, you will hear a warning beep after approximately 30 seconds. This warning will also be emitted if you press a preset button for a station which does not send the traffic programme signal (TP). Adjusting the volume for traffic announcements and the warning beep Although this volume was preset at the factory, you can use the DSC function to alter the setting (see "DSC programming - TA VOL"). Switching the warning beep off a) Tune into another station offering traffic information: · Press the rocker switch or 46 Switching on the CD mode CD is inserted, "CD" lights up in the display. Press "SCR" to switch the audio source: · Press "SRC" as often as necessary until the CD functions appear in the display (track number and elapsed playing time). After you insert a CD, the CD functions will appear in the display. CD-PAUSE / Select track: Up Down Inserting a CD · · Switch the car audio system on. >> 47 PORTUGUÊS Insert a CD (label facing up) gently into the CD slot. CD playback will begin. Fast forward, audible (CUE) Hold >> pressed down for as long as necessary. ESPAÑOL If is pressed only once the unit will return to the beginning of the track currently playing. Press the station preset button marked 3/ to interrupt CD playback. [. . . ] If you cannot select any of the functions listed here, then your car audio system is not equipped with that feature and it cannot be adjusted as a result (also see the section on "Equipment features list"). AUX IN If another signal source is connected to the CD changer input, you must switch AUX to ON. Acknowledgement tone for all functions which require a button to be pressed for more than one second. Refer to the section on "Clock". ESPAÑOL DISP. ON/OFF. Here you can set the clock to permanent display when the audio system is switched off. [. . . ]