User manual BLAUPUNKT COLORADO CM168

[. . . ] ThummerTM III Steering Wheel Remote Control (sold separately) Commande 5 distance ThummerTM III (optionnelle) Funcionamiento del control remoto ThummerTM III (optional) Funcionamento do Controle Remoto ThummerTM Ill (optional) 2 Display The display consists of three fields and varies according to the operating mode and function. Display field 1: Radio mode Memory banks and wavebands Brief indication of preset station (e. g. Pl) Cassette mode CAS - cassette inserted fvlTL - tape type Charmer mode (optional)* Current track Display field 2: Radio mode Radio frequency or station name Clock display Cassette mode TAPEUTAPE2 - side of tape playing Active functions (e. g. CPS) Clock display Chanaer mode (optionah* Current CD playing CD time (elapsed time), CD name, CD number and Brief indication of changes in function Clock display Serves as display and input field during DSC programming Miscellaneous Indicates new source (e. g. BASS, SCAN) Display field 3: Active functions 0 m In* FA LD Stereo Cassette inserted CD changer connected Loudness Radio mode - Seek tuning sensitivity lo Cassette mode RPT - Repeat function - Dolby noise reduction lm Chanaer mode loptionaa RPT - Repeat function MIX - Tracks played at random Numeric and graphic representation of volume and audio settings DSC Permanent display for DSC programming. [. . . ] The word "Dolby" and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. CD playback l Use SRC to select the CD changer. Press SRC repeatedly until "CHANGER" appears in the display. CD playback starts with the first CD identified by the changer. Selecting a CD When CD playback starts, all active CD functions and the CD number or name will light up in the display. To change the display between CD Name, CD number, elapsed time indication and clock, press 0 during CD playback. 15 When at start of first track, unit goes to last track on same disc. AIv A V The following options are available: - Mix all tracks of one CD ("MIX-CD") or Mix all tracks of all CDs ("MIX-ALL") in manner determined by the CD changer model. "MIX" will appear in display field 3 as long as the MIX function is active. "MIX-CD" or "MIX-ALL" will light up briefly in display field 2 when you activate this function and each time when the track changes. To stop mix functions, press 5/MIX again. CD selection UP Down RPT CD tracks can be played repeatedly. The following options are available: Repeat the current track ("REPEATT") or CD Select-By-Name If you have named a CD and it has been selected at least once since the magazine was inserted, the name is seen immediately, so that you can easily find the desired CD. Selecting a track Repeat the CD, i. e. "RPT" will appear in display field 3 as long as RPT is active. "REPEAT-T" will light up briefly in display field 2 when you activate this function and each time the track changes. "REPEAT-D" will show when a CD is repeated. l SCAN Use this function to scan all of the CD tracks. To start the Scan function: l Press SCA, "SCAN" will appear in the display. All tracks on the CD will be scanned one after the other in ascending order. The track currently scanned will continue to play. >> Up: Press briefly. To stop repeat functions, press WRPT. MIX You can have the CD tracks played in random order. . - Naming CDs To allow you to identify your CDs more quickly, you can use DSC programming to enter individual names for up to 99 CDs. If you attempt to enter more than 99 names, "FULL" will appear in the display. The CD name has priority over the CD number in the display when manually changing CDs. Press CC If you want to alter a name which has already been entered, select that CD in the DSC mode and overwrite it in the editing mode. If you want to change individual letters only, press << >> to move the cursor to the corresponding position and change that letter. Deleting CD names Deleting one CD name Proceed as follows: Select DSC programming mode. Press NV to select CDC_NAME. LIST In DSC mode (Direct Software Control) it is possible to assign names to your CDs. In LIST mode you can view these names without interrupting CD playback. [. . . ] Avoid mounting locations where the receiver would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would subject to dust, dirt or excessive vibration. The illustration below shows a typical installation, however, you may need to adjust the installation, depending on the receiver. If you have questions or need additional installation hardware, consult your Blaupunkt dealer. Make sure the receiver is firmly anchored (preferably at both front and back) and does not vibrate. Installing the Receiver in Most Dashboards This car receiver and its mounting bracket are designed for installation in vehicles with a standard DIN installation compartment measuring 182 x 53 mm, a 165 mm installation depth and an instrument panel thickness of approximately 1 to 20 mm in. [. . . ]