User manual BLAUPUNKT CALGARY MP35

[. . . ] Radio / CD / MP3 Calgary MP35 San Diego MP35 Operating instructions 7 645 170 310 7 645 190 310 http://www. blaupunkt. com 2 1 3 4 5 6 7 13 12 11 10 9 8 2 CONTROLS 1 Button to switch the device on/ off and operate the volume mute function. Volume control CD compartment AUDIO button to adjust the bass, treble, balance and fader. Arrow buttons X-BASS button to activate/deactivate and adjust the X-BASS. TRAF·RDS button Short press: Switch traffic-information standby on/off. [. . . ] if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Setting the volume for traffic announcements Press the MENU button 7. Press the or button 8 repeatedly until "TA VOLUME" appears in the display. Switching traffic information priority on/off Briefly press the TRAF·RDS button :. Traffic announcement priority is active when the traffic jam symbol is shown in the display. Notes: You will hear a warning beep: if you leave the reception area of a traffic information station that you are currently listening to. if you are receiving a traffic information station and the volume is set to minimum (0) or if, whilst listening to a CD/MP3, a CD in the changer or an AUX source, you leave the reception area of the tuned traffic information station and the subsequent automatic search cannot find a new traffic information station. Adjust the volume using the buttons 8. When you have finished adjusting the setting, press the MENU button 7 twice. Notes: You can use the volume control 4 to adjust the volume during a traffic announcement for the duration of that announcement. For further details, please read the "Sound" chapter. 42 CD MODE You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. We do not accept responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. For further details, please read the "MP3 mode" chapter. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH CD mode Note: If the vehicle ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD. If there is already a CD inserted in the drive, press the SRC button = repeatedly until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Selecting tracks Press one of the arrow buttons 8 to select the next or previous track. If you press the or button 8 once, the current track will be played again from the beginning. Fast track selection For fast track selection (backwards or forwards), press and hold down one of the buttons 8 until fast-reverse / fast-forward track selection begins. Switching to CD mode If there is no CD inserted in the drive, gently push the CD with the printed side uppermost into the CD compartment 5 until you feel some resistance. The CD starts playing. Fast searching (audible) For fast searching (backwards or forwards), press and hold down one of the buttons 8 until fast searching backwards / forwards begins. 43 CD MODE Random track play (MIX) Press the 5 MIX button ;. "MIX CD" appears briefly in the display and the MIX symbol lights up. Cancelling MIX track is repeated continuously until you deactivate RPT. Cancelling REPEAT If you want to cancel the repeat function, press the 4 RPT button ; again. "RPT TRCK" appears briefly in the display and the RPT symbol is displayed. Press the 5 MIX button ; again. "MIX OFF" appears briefly in the display and the MIX symbol disappears. Pausing playback (PAUSE) Press button 3 ;. "PAUSE" appears in the display. Playback is resumed. Scanning tracks (SCAN) You can scan (briefly play) all the tracks on the CD. Press and hold down the MENU button 7 for longer than two seconds. For further details, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter. Cancelling SCAN and continuing listening to a track Press button 3 Configuring the display You can choose between two display types for CD mode: Track number and clock time Track number and playing time Press the MENU button 7. [. . . ] If you select one of the presets, it is shown continuously in the display. When you have finished adjusting the setting, press the AUDIO button 6. Press the button 8 repeatedly until "FADER" appears in the display. Press the or button 8 to adjust the fader (front/rear). When you have finished adjusting the setting, press the AUDIO button 6. 54 X-BASS X-BASS You can use the X-Bass feature to boost the bass at low volume levels. The selected X-Bass setting affects all the audio sources (radio, CD/MP3, CD changer or AUX). [. . . ]