User manual BLAUPUNKT CALGARY CD30

[. . . ] 16 Activating the clock display for the car audio system when it is switched off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Selecting wavebands/memory banks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Storing radio stations automatically (Travelstore) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 5 IMPORTANT INFORMATION Important information Before you use your car audio system for the first time, please take the time to read the instruction manual carefully and make yourself familiar with the audio equipment. [. . . ] This beep is adjustable: Press 4. Selecting the mute level It is possible to select the mute level. Press the MENU key <. Press the key : repeatedly until "BEEP ON" or "BEEP OFF" appears on the display. Press MENU <. Press : repeatedly until "MUTE LVL" appears in the display. : to select the mute Switch the beep on or off using the keys :. Press level. Once you have completed the setting, press the MENU key < once more. Once you have made your selection, press MENU <. Telephone mute If your car audio system has been equipped with a mobile telephone, it will automatically switch to mute when you use the phone. This will not work unless the mobile phone is connected to the car audio system as described in the installation instructions. The car audio system will be muted to the mute level selected. 9 RADIO OPERATION Radio operation Switching to the radio mode If you are currently using the CD player or CD changer, Adjusting seek tuning sensitivity It is also possible to adjust the sensitivity of the seek tuning function. In this way you can adjust the radio to tune into stations with strong reception signals only, or to those with weaker reception signals as well. press CD·C 8 repeatedly until "RADIO" appears in the display. Selecting wavebands/memory banks Using this car audio system, you can tune into radio stations on the FM and AM wavebands. There are three memory banks for the FM waveband and one memory bank for AM. Press : repeatedly until "SENS" appears in the display. Press :. The currently selected setting will appear in the display. "SENS HI" indicates the highest level of sensitivity, "SENS LO" the lowest. If you select "SENS LO", lo will light up in the display. To switch between the FM wavebands FM1, FM2 and FMT, press FM 2. Selecting AM Press sensitivity. : to adjust the desired Once you have made your selection, press MENU <. Manual station tuning You can also tune into radio stations manually. To switch between the AM waveband, press AM 6. Tuning into radio stations You can tune into radio stations in a number of different ways. Stopping MIX Press button 4 (MIX) = again. "MIX OFF" appears briefly in the display and MIX no longer lights up. Scanning tracks (SCAN) You can briefly play all the tracks on a CD. Switching to CD mode If no CD is inserted in the drive. Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance. If a CD is already inserted in the drive. Press button 5 (SCAN) =. Note: You can set the scanning time. Stopping SCAN and continuing playback To stop scanning, press button 5 (SCAN) = again. The current track will then continue to be played. Press the CD·C button 8 until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Setting the scantime Press the MENU button <. "MENU" appears in the display. Keep pressing the Selecting a track Press the or button : to select the next or previous track. If the button : is pressed once, the current track will be heard again from the beginning. and buttons :. Set the required scantime using the When you have finished making your changes, press the MENU button <. CD MODE To remove a CD from the unit: ENGLISH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Repeating a track (REPEAT) If you want to repeat a track, press button 3 (RPT) =. Stopping REPEAT Ejecting a CD Press the CD·C button 8 until the CD is ejected. You must not hinder or assist the drive while it is ejecting the CD. If you want to stop the repeat function, press button 3 (RPT) = again. [. . . ] Press : repeatedly until ESPAÑOL SVENSKA Press AUDIO 9 for approx. two NEDERLANDS ITALIANO Press AUDIO 9 again. Adjusting the fader To adjust the fader, press GEO ;. FRANÇAIS Adjusting the treble To adjust the treble, press AUDIO Press or : to alter the balance between the left and right speakers. ENGLISH EXTERNAL AUDIO SOURCES External audio sources In place of the CD changer it is also possible to connect other external audio sources to the line output. These sources can include a portable CD player, MiniDisc player or MP3 player. If you would like to connect another external audio source, you will require a Blaupunkt adapter cable with the Blaupunkt no. : 7 607 897 093. [. . . ]