User manual BLAUPUNKT BT HS 112

[. . . ] ­ Do not make any changes to the headset and do not attempt to disassemble it. Disposal notes Use the return and collection systems available to dispose of the old device. Scope of delivery The scope of delivery includes: ­ Bluetooth Headset BT HS 112 ­ Ear hook ­ Ear plug (seizes S, M, L), size M is attached ­ USB charger cable ­ Operating instructions 3 Adjusting and wearing BT HS 112 The headset can be worn on the left or right ear. ­ Position the headset on your ear so that its fit is secure and convenient. [. . . ] ­ Activate the Bluetooth function of the cell phone and start the search for Bluetooth devices. (For further details, please read the operating instructions of your cell phone. ) ­ From the list of devices found, select "BT HS 112". ­ If required, enter the PIN code "0000" and confirm the entry. If the pairing process was successful, you hear a signal tone and the LED display flashes blue 3 times. If the cell phone supports the Secure Simple Pairing (SSP) function, you do not have to enter a PIN code for the pairing. ) ­ After registering, the BT HS 112 automatically connects with the cell phone. Next, the BT HS 112 changes to standby mode and the LED display flashes blue every 3 seconds. Note: If the registering is not completed within 2 minutes, the BT HS 112 switches off again. 8 Establishing a connection with two cell phones The BT HS 112 can be connected with two cell phones at the same time. ­ Automatic connection When switching on the BT HS 112, a connection is automatically established with the two most recently connected cell phones. ­ Establishing a connection via the BT HS 112 To manually establish a connection between the BT HS 112 and the two most recently connected cell phones, briefly press the MF button. The BT HS 112 first connects itself with the most recently connected cell phone. ­ Establishing a connection via the cell phone If the cell phone is not one of the two most recently connected cell phones with the BT HS 112, you have to establish the connection via the Bluetooth menu of the cell phone. After successful connection, you can establish another connection with a second cell phone. If two cell phones are connected with the BT HS 112, the cell phone connected first is the first device and the other one the second device. Another connection can be established only after first disconnecting one of the two cell phones. The cell phone which is still connected afterwards becomes the first device in the sequence. Note that voice dialling is available only for the first device and the operation for redialling the last number differs for the first and the second device. The other functions are executed the same way using the BT HS 112 as a connection with only one cell phone. [. . . ] ­ Press and hold down the "+" and "­" volume buttons simultaneously for approx. 10 seconds until the LED display intermittently flashes lights red and blue. ­ After the factory settings have been restored, the LED display stops flashing intermittently. ­ After the next switch-on, the BT HS 112 is in registration mode. [. . . ]