User manual BLAUPUNKT BRISTOL CD36

[. . . ] Radio CD Bristol CD36 Vancouver CD36 7 646 075 310 7 646 067 310 Operating instructions http://www. blaupunkt. com 1 2 3 4 5 6 7 13 12 11 10 9 8 2 CONTROLS 1 Button to switch the device on/ off and operate the volume mute function. Volume control CD compartment AUDIO button to adjust the bass, treble, balance and fader. Arrow buttons X-BASS button to activate/deactivate and adjust the XBASS. TRAF RDS button Short press: Switch traffic-information standby on/off. [. . . ] Note: G Any stations previously stored in this memory bank are deleted in the process. Press and hold down the BND·TS button < for longer than two seconds. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank. Listening to stored stations Select the memory bank or waveband. Press the station button 1 - 6 ; that corresponds to the station that you want to listen to. Storing stations Storing stations manually Select the memory bank that you want (FM1, FM2, FMT) or one of the wavebands (MW or LW). Press and hold down one of the station buttons 1 - 6 ; for longer than two seconds to assign the station to that button. Scanning receivable stations (SCAN) You can use the scan function to listen to all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds (in steps of 5 seconds). Starting SCAN Press and hold down the MENU button 7 for longer than two seconds. "SCAN" appears briefly in the display followed by a flashing display of the current station name or frequency. Cancelling SCAN and continuing listening to a station You can use the PTY function to select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Notes: G If the tuner does not find a station that matches the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. G If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CDchanger mode to the station whose programme type matches the one you selected. G If you do not want this PTY EON switching, disable it in the menu with "PTY OFF". Switching PTY on/off Press the MENU button 7. Scanning stops and the radio continues playing the station that it tuned into last. Setting the scanning time Press the MENU button 7. Press the or button 8 repeatedly until "SCAN TIME" appears in the display. Set the desired scanning time us- ing the buttons 8. When you have finished adjusting the setting, press the MENU button 7 twice. Note: G The scanning time that you set is also used when scanning in CD mode and in CD-changer mode. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS 36 Press the MENU button 7. Press the or button 8 repeatedly until "PTY ON" or "PTY OFF" appears in the display. RADIO MODE HICUT The HICUT function improves reception during poor radio reception (only FM). Press the or button 8 repeatedly until "HICUT" appears in the display. "HICUT 0" means that the interference level will not be cut automatically. Press the MENU button 7. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Press the or button 8 to switch PTY ON or OFF. Optimising radio reception Press the MENU button 7. Selecting the PTY language You can select the language in which the programme types are displayed. The following are available: "DEUTSCH", "ENGLISH" and "FRANÇAIS". Press the MENU button 7. Press the or button 8 repeatedly until "PTY LANG" appears in the display. Set your preferred language using buttons 8. [. . . ] When you have finished adjusting the setting, Press the Press the Press the button 8 repeatedly until "FADER" appears in the display. press the AUDIO button 6. or button 8 to adjust the fader (front/rear). When you have finished adjusting the setting, press the AUDIO button 6. 45 X-BASS X-BASS You can use the X-Bass feature to boost the bass at low volume levels. The selected X-Bass setting affects all the audio sources (radio, CD, CD changer or AUX). Adjusting the X-BASS boost LEVEL DISPLAY Configuring the level display The level display temporarily provides you with a symbolic representation of the volume and audio settings whilst you are adjusting them. [. . . ]