User manual BLAUPUNKT BOSTON CC 22

[. . . ] When drilling holes, be sure not to damage any vehicle parts (battery, cable, fuse box, etc. Note: By means of the support included in delivery you can mount the set in cars with a DIN car radio cutout of 182 x 53 mm, an installation depth of 165 mm and an instrument panel thickness around the fixing clips of 1 - 20 mm, see fig. [. . . ] Insert the car radio from the front into the support and push in until the stop springs on the sides engage right and left (distinct click to be heard). Insert the brackets right and left into the provided trimplate holes and push in until you hear a distinct click (lateral springs are unlocked). Install the car radio into the DIN cutout provided in your car's dashboard ex factory. Prepare the car radio DIN cutout (unlock shelf or dummy cover) or cut out the car radio compartment to 182 x 53 mm. Grasp behind the car radio cutout and check how many of the fixing strips of the car radio support may be bent. Insert the support into the cutout and bend the appropriate fixing strips with a screwdriver, see fig. 5, 6 Connection with multiple plug installed ex factory For vehicles with a system plug installed ex factory Blaupunkt offers an adapter cable for the common vehicle types. Connection with QuickOut installed ex factory If a car is fitted with QuickOut ex factory (at present Opel), the QuickOut ex factory has to be removed. Ground cable Do not connect the ground cable to the negative pole of the battery. Route the ground cable to a suitable ground point (car body screw, car body metal sheet) and shorten it accordingly. [. . . ] Sätt in bilradion framifrån i fästanordningen och skjut in, tills hållfjädrarna på sidorna till höger och till vänster griper in (ett tydligt knäpp hörs). Stick in byglar till vänster och till höger i de befintliga hålen i panelen och tryck in så långt, att ett tydligt knäpp hörs (sidofjädrarna går ur ingrepp). [. . . ]