User manual BLAUPUNKT BOSTON C30

[. . . ] 38 Switching Radio Monitor On / Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Instantaneous volume reduction (mute) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Repeating individual tracks or whole CDs (REPEAT) . . . . . . . . . . . . . . . . . . . . 40 Scanning all tracks on all CDs (SCAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] "BEEP OFF" means that the confirmation beep is switched off, "BEEP ON" means that it is switched on. 31 PORTUGUÊS ESPAÑOL SVENSKA press the MENU button =. NEDERLANDS Make your selection using the or button <. When you have finished making your changes, ITALIANO FRANÇAIS Press the MENU button =. Keep pressing the or button ENGLISH RADIO MODE Radio mode This unit is equipped with an RDS radio receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). Keep pressing the or button < until "REG" appears in the display. "OFF" or "ON" is displayed alongside "REG". To switch REG on/off, press the or button <. When you have finished making your changes, Switching to radio mode If you are in cassette, CD changer or AUX mode, press the MENU button =. Switching the RDS function on/off press the BAND (TS) button 2 or FMT button 2. "RADIO" appears in the display. To use the RDS functions (AF and REG), press the RDS button 3. The RDS functions are active when "RDS" lights up in the display with a symbol. When the RDS functions are switched on, "REG ON" or "REG OFF" appears briefly in the display. RDS functions (AF, REG) The RDS functions AF (Alternative Frequency) and REG (Regional) extend your radio's range of functions. q AF: If the RDS function is activated, the unit automatically tunes into the best receivable frequency for the station that is currently set. When the required language appears in the display, Displaying scrolling text Some radio stations use the RDS signal to transmit advertising or other information instead of their station name. You can deactivate the feature for displaying scrolling texts. Keep the RDS button 3 pressed until "NAME FIX" appears in the display. To allow scrolling text to be displayed again, press the MENU button = twice. Optimising radio reception Treble reduction feature during interference (HICUT) The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the treble is automatically reduced thus reducing the interference level. Switching HICUT on/off keep the RDS button 3 pressed until "NAME VAR" appears in the display. Press the MENU button =. Keep pressing the or button < until "HICUT" appears in the display. "HICUT 0" means no reduction will be made, "HICUT 1" means a maximum automatic reduction of the treble level and interference level. When you have finished making your changes, press the MENU button =. 36 TRAFFIC INFORMATION RECEPTION DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Traffic information reception Your radio unit is equipped with an RDSEON receiver. Every time a traffic announcement (TA) is transmitted, you will automatically be switched from a station that does not provide traffic information to a station within the broadcasting network that does. Once the traffic information message is over, you will be switched back to the programme that you were listening to before. If you hear the warning sound, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Setting the traffic announcement volume Press the MENU button =. [. . . ] Keep pressing the or button < until "24 H MODE" or "12 H MODE" appears in the display. Briefly displaying the time when the unit is switched off To briefly display the time when the unit is off, press the MENU ( ) button =. The time is displayed for eight seconds. Press the or button < to switch between the modes. When you have finished making your changes, press the MENU button = twice. Displaying the time continuously when the unit is off and the ignition is on To display the time when the unit is off and the vehicle ignition is on, press the MENU button =. Keep pressing the or button < until "CLOCK OFF" or "CLOCK ON" appears in the display. Press the or button < to switch between the ON/OFF settings. [. . . ]