User manual BLAUPUNKT BOLOGNA C50

[. . . ] 40 Traffic information during cassette playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Audible fast forward/reverse (CUE/REVIEW) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Repeating individual tracks or entire CDs (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Playing tracks in random order (MIX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Automatic seek tuning or The radio will tune into the next available station within reception range. Manual station selection You can also tune into radio stations manually. ENGLISH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS DEUTSCH Note: It is necessary to activate/deactivate REG in the menu. "OFF" or "ON" will appear next to "REG". Press :. Press or on. or : to switch REG off Press MENU 8 or OK ;. Switching RDS functions on/off Press or :. To take advantage of the RDS functions for AF and REG, press RDS 4. When the RDS functions have been activated, "RDS" will light up as a symbol in the display. When you activate RDS functions, "REG ON" or "REG OFF" will appear briefly in the display. Note: You cannot use manual tuning unless the RDS functions are deactivated. Starting SCAN Tune the radio into the desired station. Press and hold down one of the station preset buttons 1 to 6 > on which you want to store the radio station for longer than two seconds. Press and hold down OK ; for longer than two seconds. "SCAN" will appear briefly in the display, followed by the flashing station name or frequency of the radio station currently being scanned. Storing radio stations automatically (TravelStore) You can automatically store the six radio stations with the strongest reception in your current reception area (for FM only). These stations will be stored in the FMT memory bank. 34 RADIO OPERATION DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Stopping the SCAN function, continuing to listen to the radio station scanned selected, it will automatically switch from the station playing or from the tape deck or CD changer mode to that station. Switching PTY on/off Press OK ;. SCAN will end and the last station scanned will continue playing. Press MENU 8. Press : repeatedly until "PTY ON" or "PTY OFF" appears in the display. Adjusting the scan time Press MENU 8. Press : repeatedly until "SCANTIME" appears in the display. "CPS FF" and the number of tracks you want to skip will appear in the display. The tape will fast forward to the next or following track as selected. The flip release panel will open. Insert a cassette into the tape deck with the open side facing towards the right. Close the operating panel. Cassette playback will begin with the side facing upwards. If there already is a cassette inserted into the tape deck, To restart the current track or select one of the previous tracks, press : once or as many times as required. "CPS FR" and the number of tracks you want to skip will appear in the display. The tape will rewind to the beginning of the current track or to one of the previous track as selected. press CD·C @ repeatedly until "CASSETTE" appears in the display. Playback will resume on the side of the tape which was played last. Cassette eject Press 9. The flip release panel will open and the cassette will eject. Repeating music tracks Press 4 RPT >. The track currently playing will repeat. When the tape rewinds back to the beginning of the track, "REPEAT TRCK" will appear in the display. Remove the cassette and close the operating panel. Changing cassette sides To switch from SIDE A to SIDE B and vice versa, press 2 >. To stop repeating the track, press 4 RPT > again. RPT will disappear from the display. 38 TAPE DECK OPERATION Fast forward DEUTSCH Scanning all of the cassette tracks (SCAN) Press OK ; for longer than two seconds. Scanning will begin with the next track in ascending order. Fast forward/rewind Press :. "FORWARD" will appear in the display. Fast rewind Press To stop the SCAN function, press OK ; again. [. . . ] "BASS" will appear in the display. Switching Loudness on/off Loudness boosts the bass and treble when the volume is low to create a more natural sound. Press AUD / LD = for approx. LD will light up in the display to indicate that Loudness is active. Press or : to alter the bass. Adjusting the treble To adjust the treble, press AUD / LD =. "BASS" will appear in the display. Adjusting Loudness intensity The Loudness boost can be set in stages from one to six. Press MENU 8. "MENU" will appear in the display. Press Press : until "TREBLE" appears in the display. or : to alter the treble. Press Adjusting the balance To adjust the balance, press AUD / LD =. [. . . ]