User manual BLAUPUNKT BLUE MAGIC XLB 300 A

[. . . ] The amplifier power cable must be fitted with a fuse no more than 30 cm from the battery to protect the vehicle battery in case of a short circuit between power amplifier and battery. The fuse of the amplifier protects only the amplifier, not the vehicle battery. it is set via the AUTO TURN ON switch 4: ­ REM Switching on/off via the car sound system. The remote connection : of the XLb must be connected with a switchable 12-V power supply (e. [. . . ] Next, use the X-OVER control = to select a filter setting that provides a well-contoured bass. you may have to alternately optimise the gain control setting > and the filter setting =. A droning bass with excessive volume requires a filter setting with a low frequency. The phase switch 3 must be set so that the bass is integrated into the acoustic pattern as best as possible and not recognisable as an individual source. Also check your settings of the XLb with the bass control fully open and, if necessary, with activated loudness. Please use the return and collection systems available to dispose of the product. Anslutning 9 kopplas till plus batteri och anslutning ; kopplas till minus jord. 5/6 till de högtalarkablar (framtill eller baktill) som ligger närmast till vänster och höger. Please read these operating instructions before using the equipment for the first time. Please observe the following safety notes during the installation and connection. ­ Disconnect the negative terminal of the battery before carrying out installation and connection work. ­ Observe the vehicle manufacturer's safety instructions (regarding airbags, alarm systems, trip computers, vehicle immobilisers). ­ When you drill holes, ensure that you do not damage any vehicle components. ­ If the positive and negative cable are extended, ensure that the cross section is not less than 6 mm2. ­ An incorrect installation can result in malfunctions of the electronic vehicle systems or your car sound system. With respect to accident safety, the XLb must be secured in a professional way. When selecting the installation location, select a dry location that offers sufficient air circulation for cooling the amplifier. The XLb must not be installed on rear shelves, rear seats or other locations that are open to the front. The amplifier power cable must be fitted with a fuse no more than 30 cm from the battery to protect the vehicle battery in case of a short circuit between power amplifier and battery. The fuse of the amplifier protects only the amplifier, not the vehicle battery. You can select between 2 different audio inputs; ­ Cinch (RCA) ­ Hi level (loudspeaker connections) Use only one of the audio inputs; otherwise, it may lead to audio interferences. The preamplifier outputs are connected to the cinch (RCA) sockets 7 of the subwoofer box via a shielded sound cable. [. . . ] Increase the volume of your car sound system to the desired volume level. Now slowly increase the GAIN control > until you can hear a clear amplification of the bass level. Next, use the X-OVER control = to select a filter setting that provides a well-contoured bass. you may have to alternately optimise the gain control setting > and the filter setting =. [. . . ]