User manual BLAUPUNKT AUGSBURG C30

[. . . ] 38 Repeating individual tracks or entire CDs (REPEAT) . . . . . . . . . . . . . . . . . . . . 38 Playing tracks in random order (MIX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Scanning all of the tracks on all of the CDs (SCAN) . . . . . . . . . . . . . . . . . . . . . . . 39 DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Important information . . . . . . . . . . . . [. . . ] Warning of serious injury If the power-on volume is set to the maximum level, it may be extremely loud when the car audio system is switched on. If the power-on volume is set to 0 and the car audio system was played at maximum volume before it was switched off, it may be extremely loud when the car audio system is switched back on. This could result in serious injury to your ears! Once you have selected the desired settings, press MENU ?30 VOLUME CONTROL You can reduce the volume of the car audio system immediately (mute). For a number of functions you will hear a beep if you press a key for longer than two seconds, e. g. if you want to store a radio station on a station preset. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Mute Switching the beep tone on/off Press 4 briefly. "MUTE" will appear in the display. Selecting the mute level It is possible to select the mute level. Press MENU ?. "MENU" will appear in the display. Press MENU ?. "MENU" will appear in the display. Press Press Press level. or > repeatedly until "MUTE LVL" appears in the display. > to select the mute or > repeatedly until "BEEP" appears in the display. "ON" or "OFF" will appear next to "BEEP" in the display. A number of radio stations broadcast different regional programming at different times of the day. Use REG to prevent your car audio system from tuning into alternate frequencies which might have different programming. It is possible to adjust your radio so that these "variable texts" do not appear. Press MENU ?. "MENU" will appear in the display. Press or > repeatedly until "PTY LANG" appears in the display. or > to select from among German, English and French. Press Press and hold down RDS 5 until "NAME FIX" appears in the display. To have the "variable texts" displayed again, press and hold down RDS 5 until "NAME VAR" appears in the display. When the language you wish to activate appears in the display, press MENU ?twice. Interference-related treble cut (HICUT) The HICUT function improves reception when reception begins to deteriorate. If interference occurs, then the treble and the noise is cut automatically. Switching HICUT on/off Press MENU ?. "MENU" will appear in the display. Press Press or > repeatedly until "HICUT" appears in the display. > to switch HICUT or on or off. 35 TRAFFIC INFORMATION Traffic information Switching traffic information priority on/off Press TRAFFIC A. Traffic information priority is activated when TRAFFIC lights up in the display. Note: You will hear a warning beep if you leave the reception area of the traffic information station you are tuned into. if you are listening to a cassette tape or a CD, leave the reception area of the traffic information station you are tuned into and the automatic seek tuning function is unable to find another traffic information station. if you switch from a traffic information station to a station which does not broadcast traffic information. Then either switch off traffic information priority or switch to a different traffic information station. Interrupting a traffic announcement Adjusting the volume for traffic announcements Press MENU ?. "MENU" will appear in the display. Press or > repeatedly until "TAVOLUME" appears in the display. [. . . ] > to select the desired scan time. Press Once you have made the settings, press MENU ?Interrupting playback (PAUSE) Press 2 ( ) @. "PAUSE" will appear in the display. Stopping PAUSE Stopping the MIX function To stop the MIX function, press 4 (MIX) @ repeatedly until "MIX OFF" appears briefly in the display and MIX no longer lights up. Press 2 ( ) @ during the pause. Playback will resume. Scanning all of the tracks on all of the CDs (SCAN) To scan all of the tracks on all of the CDs in ascending order, press 5 (SCAN) @. Stopping the SCAN function To stop the SCAN function, press 5 (SCAN) @. [. . . ]