User manual BLAUPUNKT ATLANTA RCM 169

[. . . ] Radio / Cassette Atlanta RCM 169 Operating instructions Erklärung der Positions-Nummern siehe Kurzanleitung 1 2 3 4 5 6 15 14 13 12 11 10 9 8 7 21 16 17 2 20 1 3 23 22 19 18 2 Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Switching the internal output stage on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 KeyCard theft protection system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 "Training" a second KeyCard / Replacing a KeyCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The display shows "No PTY" and automatically switches back to NDR3. After the PTY program has ended the system will switch back to the previous mode (radio, tape deck or CD changer). Note: As already mentioned, these functions are not supported by all of the RDS stations at the present time. Radio text This is an RDS function which allows radio stations to transmit texts. Depending on the radio station, these texts can have different contents, e. g. It is not possible to read radio text messages unless the ignition connection is deactivated or the ignition is switched off. For safety's sake, we strongly recommend that you do not activate radio text while you are driving. The radio will switch to the linked station NDR2 for the duration of the "POP" program. During tape deck and CD changer operation, the set will also switch to the program offering the selected PTY within the broadcasting network. 76 Activating radio text Park your vehicle in a safe place, switch off the ignition. If the red arrow lights up in front of "RT", radio text is active. If you tune into a different radio station, the text transmitted by that radio station will be displayed. If the station you are tuned into does not transmit radio text, "No Text" will appear in the display. Switching radio text off Press TU, NEXT and RT (radio text) one after the other. · · Many FM radio stations provide their service area with traffic messages at regular intervals. Along with their programs, all traffic information stations transmit a special carrier signal, which is decoded by your car radio. If this signal is identified, "TP" will appear in the display (Traffic Program). In addition to these, there are also stations which do not actually transmit traffic information themselves, but by using RDS-EON it is possible for them to forward the traffic messages broadcast by another traffic information station in the same radio network. If you want to have the priority for traffic announcements activated while listening to one of these stations (e. g. NDR3), "TA" (Traffic Announcement priority) must appear on the display panel. If a traffic announcement is broadcast, the radio will automatically switch to the linked traffic program station (in this case, NDR2) for the duration of the message and return to the original program (NDR3) afterwards. This warning beep will also be emitted if you press a preset button for a station which does not send the traffic information signal. Switching the warning beep off a) Tune into another station offering traffic information: · Press the rocker switch or 77 PORTUGUÊS ESPAÑOL SVENSKA If you leave the reception area of the traffic information station you are currently tuned into, you will hear a warning beep at intervals of approx. 30 seconds. NEDERLANDS Warning beep ITALIANO · Press the TA button. If you press STOP while a message is being broadcast, this message will be interrupted. The priority for other traffic messages remains active. FRANÇAIS To switch the priority on or off: · Press TU to access menu level 2. ENGLISH The abbreviation "EON" stands for Enhanced Other Networks, which means that information is exchanged within a radio network. Traffic announcement priority on/off If the priority for traffic announcement programs is activated, "TA" will light up in the display. DEUTSCH Traffic information station reception with RDS-EON Tape operation · press a preset button which has a traffic information station allocated to it. [. . . ] DSC ­ Direct Software Control With the help of DSC it is possible to adjust the basic default settings to your own personal preferences. ENT(Enter) Press briefly to accept/store settings. Tuner Wavebands FM : MW : LW : FM sensitivity: 87. 5 ­ 108 MHz 531 ­ 1602 kHz 153 ­ 279 kHz 0. 7 µV at 26 dB signal-to-noise ratio. Autoreverse See Reverse. BLS ­ Blank Skip Automatically skips longer portions of blank tape during cassette operation, e. g. Use S-CPS to select specific cassette titles. FM frequency response: 20 - 16 000 Hz Tape deck Frequency response: 30 - 20 000 Hz Subject to modifications! [. . . ]