Detailed instructions for use are in the User's Guide.
[. . . ] 48 Traffic information with cassette operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 "Training" a second KeyCard / Replacing the KeyCard . . . . . . . . . . . . . . . . . . . . . . . . . 35 Training a new KeyCard / entering the master code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CD changer operation (optional) 49
Starting CD changer operation . . . . . . . . . . . . . [. . . ] The radio function menu is shown on the display.
Going to a preset station
Select the memory level or waveband. Press the softkey, 4, indicating from
"ST1" to "ST6" for the desired station.
Hold down the softkey, 4, indicating
"SCA" for longer than one second. The memory levels are scanned one after another, and the memory location from "ST1" to "ST6" currently being sampled is displayed with light and shade reversed.
42
RADIO OPERATION
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Stopping the SCAN, continue listening to a station
Press the softkey, 4, indicating "SCA"
again. The scanning process is stopped, and the last station sampled remains active.
As soon as a station of the selected type is found, the device changes over from the present station, or out of CD, cassette tape, MiniDisc or CD changer operation (depending on how the radio is equipped) to the station with the selected program type. Switching PTY on and off In order to use the PTY function
Adjusting the sample duration (Scantime)
Press the MENU button, 8. Press the or button, 7, as often
as is necessary for "SCANTIME" to appear in the display.
press the TUNE button, >, when the
radio is operating. The radio function menu is shown on the display.
Press the softkey, 4, indicating "PTY".
When PTY is switched on, the display briefly shows the last program type that was selected. To return to the basic radio menu
Adjust the desired sampling time with
the < key, 7.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. Note: The sampling duration that is selected is also applied to the scanning in CD, tape cassette, MiniDisc and CD changer operation (depending on how the radio is equipped).
press the TUNE button, >, or wait for
eight seconds. Selecting the program type and starting the search
Press the
or
button, 7.
Program type (PTY)
As well as the station name itself, some FM stations also supply information about the type of program being transmitted. Examples of these program types could be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Using the PTY function it is possible to specifically select stations transmitting a particular program type. Either switch off the traffic information priority or change over to a station with traffic information.
Changing the displayed information
You can select the information shown on the display. The upper display line (the headline) can display the station name, frequency or the program type. The lower display line (DOT field) can display the time or the memory level. Changing the headline
Hold down the DIS button, :, until the
desired information, i. e. Changing the DOT field
Hold down the DIS button, :, for longer than one second. The display switches between time and memory level.
45
TRAFFIC INFORMATION
Adjusting the volume for traffic announcements
Press the MENU button, 8. Press the or button, 7, until "TA
VOLUME" appears in the display.
CASSETTE OPERATION
Cassette Operation
Playing cassette tapes
q
If there is no cassette in the device, button, 1.
press the
Adjust the volume with the
7, or with the volume control.
buttons,
The control unit opens to the front.
Insert the cassette into the cassette compartment with the open side to the right.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The settings are then saved.
Close the control unit.
The cassette starts playing with the side that is facing upwards (side A). q If there is already a cassette in the device,
press the CC button, <.
The cassette is played in whichever direction was last selected.
Ejecting the cassette
Press the Press the
button, 1. The cassette is ejected.
Remove the cassette
or
insert a new cassette. Close the control unit.
Changing the direction of play
To change between the directions of play for side A and side B,
press the softkey, 4, indicating "REV".
Note: The direction of play is automatically reversed at the end of the tape (auto-reverse).
46
CASSETTE OPERATION
To select the next or some other track,
press the softkey, 4, indicating "SCA"
again. [. . . ] In order to select the next filter, first
press the OK button, 5, then the button, 7. When you have completed all the settings, press the DEQ button, 6.
Adjusting the level indicator
The level indicator, or spectrometer, on your display temporarily provides a symbolic indication of the volume, the tone control settings and the equalizer settings while you make the adjustments. When adjustments are not being made, the spectrometer can be used to display the car radio's output level. Switching the spectrometer on and off
When you have completed all the set-
Adjusting the sharpness of the filter
Press the DEQ button, 6. [. . . ]